5-in-1 1/4 Inch NPT AR2000 Mini Pressure Regulator Kit for Compressed Air Systems, Adjust 0 to 145 Psi

Nice piece works perfect

I needed just a filter to keep dirt and dust away, but found this that came with an oil/water filter for almost the same price. Decided to try it and so far works perfectly. It's airtight and see no loss in pressure whatsoever for my amateur airbrushing needs. There are two regulators; one for air pressure and the other to maintain the amount of moisture that goes out. So far, it has surpassed my expectations in performance, although the main regulator knob can be improved with a little bit more precision, which is not a deal breaker. I love this product for its quality and value for the price. Don't hesistate to buy this if you're in need of an airbrush compressor filter regulator.

It's a quality piece for the price. I've dropped it several times because I put a quick connect on each side and it's held up fine. Only downside is anything over 90psi output the adjustment knob leaks a little.

This package comes with all you need to replace the regulator on your compressor. The housing is nice, the gauge is clear and easy to read, and the package includes several different fittings, including a shutoff valve. The knob lifts up to turn, and then pushes back down to lock. The plastic does feel a little cheap, but I rarely change the pressure so I dont expect any issues.

Found out that I had a leak on one side ports due to bad 1/4" NPT threads on the body; about 4 threads in. I did use a small amount of teflon tape, maybe 3 to 4 wraps, on the included couplers however did not make a difference since the threads on the body was not very good. I ended up getting a replacement through Amazon, but the replacement came in a relabeled box and was missing all 4 couplers. So I ended up returning for credit. 5 stars for Amazon's return service, 0 stars for inconvenience, lost time, and crappy QA on the product.I just noticed that there were other reviews on here that experienced the same cross threading issue also.On the positive, the price is right if you can get a working set. The brass couplers themselves are nice quality and have consistent threading on them. The quick connect couplers were also nice quality, though i'm unsure of the material.Good luck!

Producto cumple expectativas, fácil de instalar y usar

Usually, you can change what side the "input" goes by removing the pipe plug on the reverse side. NOPE NOT THIS ONE. I tried heat, I tried Kroil. I tried heat and Kroil. That pipe plug aint coming out especially since the Allen key got spun (yes had to put that much force) So had to do creative plumbing the get the tubing to the proper "input" port instead of the way I wanted it.Also, the pressure gauge will not seat where the gauge is properly centered. My OCD cringes at that but the gauge works.Its inexpensive, it kinda works and its not leaking. Next one I but will be from someone else which is a shame because I have NEVER had any issues with any TAILONS products.

Great for far