Mounting Dream TV Wall Mount for 32-65 Inch Television,Mount with Swivel and Tilt, Full Motion Bracket with Articulating Dual Arms, Fits 16inch Studs, Max VESA 400X400 mm, 99lbs, MD2380

Works really well. Had a 40 inch TV on it and upgraded to a 65 inch tv. Was a little nervous about its ability to hold it since I was pretty much red-lining the rating for it. After about four months with the 65in TV, the mount is holding up surprisingly well. For the price, it's pretty strong, easily adjustable, and easy to mount.

This mount is excellent. It perfectly fits a standard 16 inch stud spacing, but no more than that. The outer most holes for the stud mount go out to only 16 1/4 inch, and have slotted holes for the smaller stud spacing. More specifically, I bought and mounted this for an LG G5 Series 55” OLED. Not only does it fit for this specific TV, but it also has room for adjusting it up and down, sliding left and right, and allows the TV to come out and inwards using the extendable hinges. I do like the little bubble level it comes with, it’s nice to keep and save in my office desk, for little nuance projects. Only thing I wish it came with, were 4 washers for the lag/stud bolts. The surface area that the bottom of the head of the bolt, doesn’t seem to have much contact area for my liking. So I added 4, 1 inch wide washers to give the bolt more area to clamp the mount and spread the load across the slotted hole. Other than that, with a little measuring and thought, this mount was extremely easy to install. Do take the time to see how far up or down you want mount the long black mounts that actually attach to the TV. Other than that, it’s still holding up great. Before I mounted my TV, I grabbed a bathroom scale, and while i stood on it, I pulled more of my weight onto the mount, and I wanted to confirm it would hold 100 or so pounds. It did so very well, felt and sounded sturdy at about 140 pounds. This manufacture does state 100 pound limit if I can remember correctly. So just keep that in mind.

This was quite slick to install. Only thing to be aware of, it’s about 16” wide, so if your studs are not centered right around the spot you want your TV mounted, you may want to either hit 1 stud and drywall anchor the other side (not what they recommend but probably ok if your TV isn’t very heavy) or do what I did and run a couple 1x4s across a few studs to give you a solid base to mount this into. But mounting it and hanging the TV really was very easy. I am really happy with it - it’s rock solid, has a really wide range of motion, pulls out from the wall quite a long ways, and can turn quite far, too, which makes it easy to reach all the sockets and ports in back.

Installed without problems. Works well. Very glad to have the television out of the way most of the time, flat against the wall and safe from being knocked over, then easily and safely pull it out and angle it when we want to watch something.

This mount has increidble reach and is very solid. As a comparison my other primary TV mounts are the Mount-it Beast (also very long arms but dual).I needed this for a very unique mounting scenario. See images attached, but I was able to cut the main wall bracket to fit between windows, while still hitting two studs.Why four stars? Very small maount of slop or sag due to the lenght of the arms, and it being a single arm mount. It's not a big deal and I persnoally have really high expectations for this type of movement, however it does cause you to need to relevel the TV with any major movement of the arms. I don't think this a is a flaw necessarily of this specific mount, and rather just a symptom of the mount being an extremely long single armed mount. The pivot feature and mounting hardware all works great.

This Mounting Dream TV wall mount is exactly what I needed for my living room setup. Installation was straightforward — the instructions are clear and all the necessary hardware is included, so I had it up in under 30 minutes. The full motion articulating arm is smooth and sturdy, allowing me to swivel the TV left and right and tilt it up or down to get the perfect viewing angle from anywhere in the room. The build quality is impressive for the price — it feels heavy-duty and I have no concerns about it holding my 55-inch TV securely. The dual arms provide excellent stability and the post-installation leveling adjustment is a nice touch that made it easy to get the TV perfectly straight. I've had it up for several months now and it hasn't budged at all. Highly recommend for anyone looking for a reliable full-motion mount.

Easy to mount. Instructions complete and easy to follow. Hardware kit was adequate. Quality is nice.

Very easy to install. Very solid. Not Chincy at all. Comes with everything needed to hang your TV. Works perfectly the first time. Made for a wall with studs 16 inches on center as it is only 16 inches wide at the base. If you can’t line up on your studs probably not right for you.

good finish easy to install and sturdy

I am really pleased with this mounting kit and highly recommend it to anyone needing one for a 26-55" TV wall Mount.There are a few different kits available depending on the Wall Stud Distance and one or two arm mounts. I choose the two arm mount 16" Spacing kit.Like always shipping was free and really fast to my small remote town via Canada Post. Very pleased how fast it came.It was nicely packaged and when opening it, I found everything nicely labeled and packaged nicely. The instructions with the kit were really well done I feel, and easy to follow.Some of the Bonus Features I found were:1) Included a really nice HDMI Cable2) Includes Not Only a Wall Template but a small Bubble Level to connect to the wall template, but also a larger level for other leveling needs.3)Contains handy velcro straps for cable mounting.Mounting the wall mount was pretty simple, I found where the studs were on the wall and marked them with a pencil, I then found the right position for my mount using my markings and the included template. It includes a small level you mount to the template and this allows you to get it nice and straight. I then predrilled the mount holes and removed the template.I was painting the wall, so did found the locations and predrilled holes before doing drywall repairs/painting, just in case.When the time came to mount the wall mount, I used the included lag bolts and put them into the wall studs I pre drilled earlier.You use the included larger level to get your wall mount just right and then tighten in the bolts.The kit comes with a good selection of bolts, spacers and washers to mount the mounting pieces to your actual TV. I found I needed longer bolts, but the spacers etc worked perfect.Just lift the TV up now and attach it onto the wall mount. Once on, tighten the lock screws and its on there good.You can then make the adjustments like tilt and any fine tune straightening.I really like how well this kits is made, and all the included things to make installation as simple as it could possibly be.Being able to pull the TV Away from the Wall and move at angles if we are out on the back deck is really handy and moves smooth.I would highly recommend this kit to anyone needing one, it really made installing my first TV wall mount a breeze and I feel comfortable with my TV hanging on it.

Very sturdy. Easy to install

I used this for my living room TV. Mounted pretty easy. The instructions and all the included accessories make this a fast and clear process. I would recommend and buy again.

Excelente calidad y funcionalidad.