Briggs & Stratton 19069 Flywheel Puller,Black

[ Update Aug 2018] I have since used it on three different lawn mowers (20" murray, 22" Murray, and 21 " craftsman) and have the same easy results. Make sure you have the self tapping screws really screwed into the flywheel, or else as you turn down on the nuts it will start tilting/popping up. Also I would turn the nut downward on one end and then turn the other side nut. And slowly like always once you hear that "pop" that flywheel good as off. Though it comes with 4 nuts, I have never found what to do with the other two nuts that would be on the bottom end of the bolts, below the black bracket plate. I have always just left them there on the bolt without doing any tightening of them, whereas with the other nuts that are above the black bracket plate are what i was turning downward to get the flywheel to "pop". I still find using this faster and easier than using pry bar and bang it. [Original Review] Works great. Saved me alot of time when I was getting nowhere with the other cheap skate methods of hitting the shaft with a hammer and a pry bar. Do yourself a favor, just get this and you will get that flywheel off in less than 3 minutes. The bolts are self tapping and cuts into the holes of the flywheel with no problem. The instructions on how to use is really really skimpy with just a diagram of how it should be assembled to use. Just go to YouTube and find one of the videos on how to properly use. When you do screw down the bolts into the flywheel go slow and use a socket wrench so you have better control to keeping it vertical and turning slow. Also like others have said, when you hear like a "pop" sound, its distinct, once you bolted them down, the black bracket against the engine spindle and you slowly tighten the nuts alternately, its done, loosen just like that. Listen for that pop and you are done and can remove the flywheel easily. Yeah, it seems to cost alot for a black colored metal, 4 nuts and self tapping bolts, but heck we talking about convenience and fast removal, just like that. Which if you do hit alot of tree roots or rocks with your lawnmower, you will probably need to use this again to replace the flywheel key....so its not a one time use.... :-) Used it on a 6.5 hp Craftsman with 21 inch blade lawnmower. Easily popped the flywheel off. Replace the sheared key and was done fast.

It’s always nice using oem tools. Worked perfectly to remove the flywheel of my mower.

The tool worked as should. Easily installed and pulled the flywheel loose. No more banging and prying from now on. I tapped the hole myself 1/4 - 20p. Hand screwed in to bolts and tightened with a ratchet. Thought it would be a struggle dealing with a partially sheared key however the flywheel popped loose after a few turns of the 7/16 wrench. Love this thing!

Does not fit over the flywheel bolt. The hole is just a tiny bit too small. Very frustrating.

The tool is good. good quality. they just sent me the wrong one. I don't think it was the seller but the search on amazon was not accurate. This has been a problem lately with amazons search function. It will push their most profitable product before the correct one. its a pain. Returning this was a nightmare. Actually it still hasn't been returned. been waiting for a shipping label for almost 2 weeks now. when I contact amazon, they never respond. Don't know if this is the seller falling short or if it's amazon. either way, it's a pain in the ass. minus 1 star for poor communication. and minus 1 star for hassle of return.

This is a solid product but I had trouble because the threads on my flywheel were stripped. The puller would not screw into the flywheel on one side properly. I can't knock this product for not working with a bad review because my flywheel threads were stripped, so I just gave it 4 stars. I don't know how well it works, but it's construction seems solid.

Item worked perfectly

It was the correct item for the equipment

On reflection, a good purchase , it's smaller than I expected but did the job perfectly. I watched all the YouTube videos beforehand and didn't want to risk beating the flywheel off with a hammer and risk cracking it . It's one of those purchases that's going to live in a draw , till I shear the key again and spend hours finding it ,but that could be an age thing .

I easily and safely removed the flywheel on my Briggs and Stratton lawnmower engine with this tool. I strongly recommend it. I figured that a broken flywheel will cost around 100$ to replace. Simply not worth the risk to try to remove it with a crowbar or another tool.

Quick response. As advertised

Sehr guter Abzieher, erleichtert die Demontage des Schwungrades erheblich ! Wurde schnell geliefert und ist sehr gut verarbeitet .

No need to tap the fly wheel. Great stuff.