DAYBETTER Led Strip Lights 32.8 ft RGB Color Changing Lights Strip for Bedroom, Desk, Home Decoration, with Remote and Power Supply

Super simple to put up. Adhesive back works well, just be sure to clean the area before installing. I had a malfunction in one of the strips that resulted in a section about a foot long working improperly. I contacted DayBetter and within 2 days, I had a replacement set. Product is great, customer service was fast and friendly.

I bought these for our basement “gaming room” used by a 9 and 10 year old. They are very easy to put up and have been working perfectly for at least 6 months. 200ft is super long and able to light the edges of the room as well as the 2 tv stands. The kids say our basement is “epic” and has become the place for the neighborhood kids. Highly recommend because they are easy to put up, inexpensive and look cool! Will buy again.

So I just purchased these lights and so far so good. I had another set by another company that was a little bit thicker and the adhesive wasn’t as strong so kudos to DayBetter. First off I want to start with unboxing and work my way through. Also from my video keep in mind I have 4 strips across. The two that came in one box covered from my light switch all the way to the middle of my tv. The rest of the door and the wall above my window was done with two more strips and 3 connectors. Unboxing: The box is pretty small but both strips of lights are rolled up inside neatly. They leave a little extra slack on the end of the 3M adhesive so you can start it easily with out having to pick at the beginning or cut anything. The 12v AC/DC adapter comes with this as well as the RGB control box with two connectors and the IR Receiver. Application: I tested all strands of lights out and they worked perfectly fine. The reason I said 4 stars on brightness is because I haven’t seen them all at night yet (only saw two strips not 4. Will update afterwards.) the 3M tape on the back of the lights peels off with ease. When applying make sure you have your lights lined up the way you’d like them because the tape is pretty strong. Besides that the lights go on fairly easy and I don’t think falling off will be an issue at all with these. Display: The colors all function properly and are quite vibrant. I still don’t know how to work the custom feature yet but I’m sure someone does or will figure it out. I’m pretty content on the colors already provided. Connecting: So like I said I have 4 strips on here. I had to use three connectors total but it doesn’t weaken the power or dim the lights at all. I bought them on amazon as well and the product name is “ TronicsPros 10pcs 4 Pin Solderless Waterproof LED Strip to Strip Connector RGB Flex LED Ribbon LED Rope LED Tape Light Gapless Adapter for 10mm Wide Waterproof SMD 5050 RGB Flexible LED Strip Light”. I had to flip them upside down I guess to get them to touch the GRB strip. Make sure that they are on the same way otherwise you may get two different colors. To open them I just used a mini flat head and gave it a light twist and the opened with ease! I’ve added pictures here and if you have any questions please feel free to reach out!

I am updating my star rating from one star to four star based on the company reaching out to me regarding this issue. They showed that they care about their customers!! I would still like to see an easier light strand plug in to the transformer box so I left at four stars because of that. One 100 ft. light strand only lights blue and green. Also the “plug in” to the LED box is not easily able to be disconnected or reconnected. I bought these not knowing if I’d need 100 or 200 ft of lights. I figured I could plug each light roll in as needed but it is pretty difficult to do! When trying to get product support for this issue… the website directed me to a page where I fill out my information, order number, and comments but it will not allow you to click on the send button. I have no way to contact for support and item can not be returned. I would not purchase these again but would look for a different brand with easier connection and disconnect options.

The DAYBETTER 32.8 ft RGB LED Strip Lights are a fantastic way to add ambiance and color to any room! I installed them in my bedroom and on my desk, and they completely transformed the space with vibrant, customizable lighting. The colors are bright and vivid, and the included remote makes it easy to change colors, adjust brightness, and select different lighting modes. Installation was straightforward—the strip comes with a strong adhesive backing that sticks securely to most surfaces. The included power supply is reliable, and the lights work consistently without flickering. The 32.8 ft length is perfect for covering walls, shelves, or behind a monitor for bias lighting. These lights are high-quality, durable, and visually impressive, making them a great choice for home decoration or mood lighting. Pros: - Bright, vivid RGB colors - Remote control with multiple modes and brightness levels - Easy installation with adhesive backing - Long 32.8 ft strip for versatile placement - Reliable power supply and consistent performance Cons: - Adhesive may need reinforcement on textured or uneven surfaces Overall, these LED strip lights are fun, high-quality, and a great value for anyone looking to enhance their room or workspace with customizable lighting.

Awsome all year long

My daughter bought something like this from somewhere else and installed them herself. Her's had connectors in between each strand that daisy chained one to another. They also had an adhesive that was somewhat forgiving. Moreover, she got more lights (longer strips) for the same price. So, she figured these were the same and volunteered to install them for her brother. I thought that was nice of her so I let her go. That was a mistake on my part. Unfortunately, these strips have adhesive that is basically permanent. You don't want to try and take them off if you like your walls. Moreover, they don't daisy chain. The power has two connectors on it, and you're supposed to connect the strips directly to the power. My daughter assumed she could daisy chain and completely ignored the additional connector. She just put them on the walls one right after the other. I don't know if she read the instructions but I did later and I could see how she would of missed it (thinking they were like hers). So, we have one strip that lights up, and then a dead strip after that. She had it working initially by taping the strips together, but that didn't hold. She left no room for error either, the overlap of the strips was only a couple millimeters. I tried to gently pull off the dead strip, but no matter how careful I was, it took the paint and drywall paper with it. So, this gets 5 stars for adhesion if that's what you're looking for. I wasn't really keen on the idea of spackling and repainting the walls so I just left it and sulked. The end of the strip has 4 exposed copper leads. If you hold them tightly together with the other strip, they do work. So, I borrowed a couple specific legos from my son's collection. They are 4x1 and one has a flat spot in the middle. I managed to snap the two strips together with the legos. Like I said, she only overlapped the strips slightly, so having the lego around both sides of the strips to apply force is tenuous at best, but it is working. It stops working occasionally. I make sure the legos are firmly pressed together and try to get the connectors closer to each other. That usually fixes it. If I get a chance I'll add a picture. So, to sum things up, If you buy these... read the instructions before installing, and/or don't assume they're like the other ones all the kids on Tik Tok are installing themselves ;-) Be aware the adhesive is strong. Good luck.

My wife and I recently had a screened porch converted to a sunroom, and my wife wanted to add some sort of mood/celebratory lighting. After considering a number of options, we found the Daybetter R5032 at a terrific price, and placed an order for one package. Once we received the R5032 package, and started considering how we could mount the LED strip(s) we decided we would like to mount the light strips in a trough near the ceiling and use them to provide indirect lighting for the room. The two 5 meter LED strips would allow us to place lighting along two walls of the sunroom. Not being able to decide which two walls should carry the lights, it seemed to make more sense to place the lighting all the way around the room so we considered ordering a second R5032. This would mean that we would have two controllers, and two IR receivers possibly placed in two different locations in the room. The LED strips come with connectors on both ends making it seem like they could be connected in series, but this is not supported by Daybetter. The controller has two separate leads each of which connects to one of the 5 meter LED strips. Connecting both LED strips in series to one of the controller power leads would burn out the controller. In order to place both IR receivers in the same location, but have one of these controllers control lights that were 5 meters away, we needed extension cables that would allow power from one controller to run to a LED strip 5 meters away. I contacted Daybetter customer support to ask if they sold such extension cables. The next day I received an email that said they did not carry any such cables, but they did provide a link to a company that sold such cables through Amazon, and they were willing to help offset the cost of the cables. Thanks to this quick response, I ordered a second R5032 package from Daybetter, and a set of 4 four-conductor 3 meter extension cables from HUALAND. Connecting two of the extension cables together gave me enough length to reach an LED strip 5 meters away. The next issue became how to build a trough in which the LED stips could be mounted. I found a solution at my local Lowes where I discovered a vinyl door edge that was a bit larger than the 0.5 inch width and height needed to conceal the LED strip. The size was perfect (UnmountedTrough.jpg), and the price was a tenth of what wood trim would cost to cover the same length. Since the trough was vinyl, I needed to insure that the LED strips did not generate enough heat to melt them so I laid out the LED strips and turned them on to full brightness to evaluate the amount of heat generated by the circuitry on the strip. The heat through the resistors on the LED strip was barely detectable. I painted the door edge trough and installed it at the bottom edge of a 1 x 2 trim piece that already went around the room (Trough+IRsensors.jpg). I ended up installing the LED strip along the back edge of the trough rather than the bottom of the trough because I did not think the horizontally oriented LED strip would bend nicely around 90 degree corners (LEDinTrough.jpg). Bending a vertically oriented LED strip around the room's 90 degree corners was no problem. Once the trough and the LED strips were installed, I then needed to place two power packs and two controllers somewhere hopefully out of sight. An attic is directly above the sunroom so I decided to drill a hole in one corner of the sunroom ceiling, and route the 4 conductor power cables through the hole into the ceiling where the two power packs and the two controllers would be mounted. The power pack cords were long enough to allow them to be installed almost anywhere convenient in the attic (PowerPacks+Controllers). The two controller modules had to be installed right next to the hole in the attic floor so that the IR receiver cables could pass through the hole and be aimed out to the center of the sunroom (Trough+IRsensors.jpg). One remote control sends a command that is received by both controllers so all light strings react in unison. The results are highly satisfactory as I hope can be seen from some of the included pictures (LEDsunroom1-7.jpg). The light strips provide a wide range of colors at about 5 intensity levels, and the adhesive backing made mounting in the trough super simple. The product works great for us, and the customer support was outstanding.

Le encantaron a mi niña ya instaladas en su cuarto, fueron facil de instalar y tiene muy buena luminosidad.

Work great when first receiving them in May, bright, easy to put on but now for some reason one side doesn’t work otherwise work good!

I contacted the seller asking for a uk adapter but did not receive a reply so I am now returning it to look for something else!

excelente articulo, tienen buen brillo y fáciles de instalar

Remote control does not power on or off lights lights work and you can switch between colours but you cannot turn lights off you have to unplug them