Syneticusa MB Retractable Tonneau Cover fit 2016-2027 Tacoma 5ft (60”) Bed

This "cover" is very clean looking and easy to use. Installation wasn't that bad. I own a 2019 Tacoma TRD Off Road. For this model I needed to take the top plate off and removed the plastic seal to make it fit cleaner. Now that its on it looks perfect. Not truly sure how it does in the rain and all, but from what i have seen around this is totally worth the money. 1 YEAR LATER: I own a media company and haul stuff expensive gear around, nothing has been ruined but 100 percent not Waterproof. Not fun when you come out in the morning and the gear and tools you have in the bed are totally wet. The drains that you have to drill through the bed are totally useless. Kind of sad. I loved everything about this cover until about 4 months ago when it started leaking. Will be upgrading to a cap next. Over all I do still like this, just wish it lasted longer than that it did (1 year).

I wish we had purchased this sooner. In the past, we had to put our luggage and other items that wouldn't fit in the cab in heavy-duty garbage bags to keep them protected from the elements when traveling. And, we had to move everything of value from the back of the truck to the cab if we stopped to eat along the way. Not anymore! We no longer have to worry about if it rains when we need to utilize the back of the truck. A sudden rain storm when road-tripping with the luggage in the back of the truck used to be a reason for panic and dread. Now, it's no big deal because everything is protected. Stopping to eat along the way - no problem. The hard top can't be cut so our things are safe. Simply running errands on the weekend and need to put stuff in the back - no problem. Again - the hard top keeps things from being stolen while you're in the next store. Something too big to fit, under - no worries! The top rolls up like a garage door so you can use the open bed if needed. If you're considering buying a truck-bed cover I highly recommend this one!

Good product. Installation is difficult. Videos online were helpful. Drain tubes are useless as they are too big for the drain holes in the bed of the truck (‘26 Toyota Tacoma). Low profile and slick looking though.

For the price you can not beat this cover. Instructions suck. Seller sent the wrong Cannister assembly in the first order and took them over a week to fix. They answer E-mails but do not seem to know much about the product. For 2019 Tacoma you will have to remove the TWO Tie down hooks in the front of the bed on the sides. Lay pieces out on floor, Support the Side rails with the foam from the package, Slide the Rolling portion of the top into the groove and Bring the rail just past the front of the cannister and screw togehter. Do the other side the same way. Lay complete assembly in the truck making sure that your front gasket is not bent under the cannister. Install Side rail hardware DO NOT TIGHTEN. Use the extra Piece of metal to hold the side rails apart at the back of the cover. And Adjust and center cover on bed check that the gaps are covered and tailgate close. Once you are satisfied with the alignment. Have Someone STAND ON THE RAIL and Finish Tightening down the Hardware to get a good seal. The Drain lines are WAY TO BIG. Go Buy some 1/2 To 3/8" Barb hose reducers and some 3/8 line. Cut two inches of the 1/2 Hose install barb and insert in the bottom of the cannister and tighten. Then install 12" of the 3/8" hose to the barb and run to holes in the bottom of your truck. You will have to make the holes bigger. BE CAREFULL THE Drain HOLE on the drivers side is RIGHT ABOVE THE GAS TANK FILLER TUBE> IF YOU DRILL TO DEEP You will damage this hose. Insert 3/8 Hose into the holes you made and your down. Pros: Lightweight, Easy to install, Looks good. Cons: Locks are Keyed differently on cover locks. (COME ON You cant get TWO Locks KEYED THE SAME?). Screws on top panel over canister are Silver not Black. Hardware for the side rails is not big enough to catch the complete rail. See pictures. Gets scratched very easy. The cover Got scratched from pulling a cardboard box off it. JUST THE BOX! NO Staples etc. Nothing in the box. The cardboard scratched it. So I do not Know how long this will last. I am Happy for know. Will update later. Does not seem to leak much more than any other cover I have had.

Purchased about 5 months ago. This product works as intended and keeps the bed of the truck dry. The customer service has been great. One of the locking mechanism plastic covers broke and they shipped me 2 more and received the parts in a few days. The company is very responsive.

this is advertised to fit a 2016-2025 Tacoma. There are major differences in the Tacoma after 2024 and this product does not fit or have the correct clips to work on a 2025 Tacoma. The return process is difficult and would not recommend.

Me gustó mucho este producto fácil de montar funciona perfecto muy buena calidad

This product is nice seems very well made. I like the way it looks and fits in my truck. A couple of things that I didn’t like was, it says it’s made to fit my 24 Tacoma which it does but the drain hole were too small for the hose, so I had to make them bigger which I didn’t want to do but did anyways. Another thing is the screws it has for the top cover rusted very fast even with the protective caps it came with. Maybe seller should have some sort of anti rust screws. Also it seems water still comes in somehow, not a lot but still. I installed it my self and had help adjusting it. Would have gave 5 stars if it didn’t get wet still. It seems water may be coming in from corner some how.

Although this product is made in China it is very well made reasonable to put together they only downfall is on my 2025 Tacoma I had to cut the rear drains out because they were hitting the tailgate and I couldn't move it any further forward or it would hit the cap