GX160 GX200 Carburetor for Honda GX120 GX140 GX168 5HP 5.5HP 6.5HP Engine

Carb and spark plug worked great. Got the motor up and running in minutes!

This fit exactly as expected and was straightforward to install. Everything worked properly, and it solved the problem quickly.

All parts fit and worked perfectly. My gas air compressor hadn’t been used in 10 years and although I drain the float bowl when putting it up the carb still got clogged up. I pulled it off, removed the bowl and shot cleaner into everything including the main jet which def was plugged but I must have missed a passage way somewhere because while I got it to idle after doing a static governor adjustment it would die when the throttle was opened. Installed this carb and all is well. I finally found a screwdriver that could reach the jet to remove the old one and there might have been a little gunk around the orifice but it was not blocked. I pulled the plastic passageway plug under the pilot screw and blasted everything again and again with cleaner and then did it again. I’m leaving things as they are and this time when I put the unit up for the season I’ll swap the old (dry) carb back on and drain this new one completely. Maybe both will work next time but if not this 3rd party one should go back on and work fine.

Was okay for the job. Fit properly.

I let my Troy Built rototiller set to long this time and the carburetor need cleaned and rebuilt. When I looked for a carb kit I saw the GX160 GX200 Carburetor with 17210-ZE1-517 Air Filter Tune Up Kit for Honda GX120 GX140 GX 160 GX168 GX20. The price was so good I had to try it. The carburetor worked great, mounting gaskets, fuel tank screen and line was enough to make it run like new again. I installed the new air filter and spark plug because it came with the kit and now it should last another 10 years. I also have spare coil, choke lever and ignition switch that came in the kit for future use. I was able to put the little motor in top shape in about 30 minutes. I would have spent more time than that just cleaning the old carburetor. If you think you need a carb kit, buy this instead. You'll come out way ahead.

This was easy to install on my pressure washer.

They work. Simple enough replaced on Honda transfer pump gx160

Easy to install started on first try. Forget trying to rebuild the carburetor for this price you will save yourself a lot of time and headaches!