EKR Car Seat Covers for Honda CRV 2017-2022 Leatherette Full Set

We installed these on our 2020 CRV EX Hybrid. This seller should be commended for their amazing customer service! We ordered these seat covers 6/28/20 and received them 7/17/20. They started out as a standard order but then changed into a special order...we wanted solid gray instead of gray/black. We were about to cancel our original order of the black/gray after seeing that the delivery time was not until August/September and that another vendor had a similar item that did not require unzipping for the back seat arm rest. After we requested a cancellation, the seller contacted us and updated us on the delivery time...projected about 25 days. They also were happy to switch the color from gray with black sides to solid gray. We decided to try it out and see if the rear seat arm rest issue would be ok. Since we changed colors, this essentially turned into a new, custom order on 6/28/20. We were very pleasantly surprised when the seat covers arrived on 7/17/20, just 19 days after we changed our order! The seat covers seem quite durable and well made...we've only just put them on so we haven't driven around with them yet. They seem comfortable just sitting in them. And they look great! The gray color is a perfect match for the Honda gray interior of our CRV and the fit is very good. There are a few wrinkles here and there but those may work themselves out after the seats are used a while and some may just be a result of our installation! They are not a problem. As the back seat arm rest being behind a zippered panel, we figured that since we rarely would use the rear seat arm rest, that having it behind a zippered section would not be a major issue. Overall, they look terrific and unless you really looked carefully, you wouldn't notice that they are add-ons rather than factory leather seats. INSTALLATION: Make sure to read the directions AND, even more importantly, watch the video carefully...a couple of times! It helps to especially make note of how and when each of the straps and fabric sections (especially the narrower ones) go into the space between the seat back and the seat bottom and then connect under or behind the seats! And it REALLY helps to have 2 people working on this installation! We did NOT need to remove any seats! FRONT SEATS: Note when preparing to start the installation you must release a piece of the original seat covers...a plastic-y panel that comes down from the back of the seat and wraps under the seat...there is an elastic strap that secures it underneath the front seat...note that the CRV does not use a hook on the elastic strap that secures the flap under the back of the front seats...the elastic strap is just looped around components of the seat bottom....you just have to follow the strap with your fingers to determine where it is looped and then unloop it to release it. You will see this in the video. The driver's side was the hardest primarily because it was the first one we did and we learned a lot during that install. The passenger side was then a breeze. BACK SEATS: The 60% side of the back seat was a bit tricky but NOTE that in order to reach into the space behind the back seat (between the seat back and the cargo area) you MUST tilt the seatback forward a bit...then the space opens up and you can reach in and under. You don't need to try and release the wire and spring mechanism that secures the edge of the cargo area base to the seatback. It definitely helps to have TWO people for all of this but especially for the back seats: one person holds the seatback in the tilted position while the other messes with feeding the straps under and through! The 40% side of the back seat was pretty easy...a hybrid of the passenger front seat and the 60% back seat. There is a piece of rope attached to the sides of the seat bottoms where they both fit between the two seat sections...one is a straight piece and the other has a loop. You can loop the straight piece through the loop and use it to help secure the side of the each seat bottom down into the space between the seats. CONSOLE COVER and HEADRESTS: The front console cover is ok...you have to be sure to snug the band out of the way of the hinge so that the console locks into the down position. The seams between the top and sides kind of get in the way of it lying flat smoothly. We plan to use it for a while and see how we feel about it. The headrest covers take a little effort to get on but they fit well and look good. UPDATE December 2020: After 6 months we are still really happy with these seat covers. Any wrinkles that were in there at the beginning have pretty much vanished. The seat heater works great through them. They were comfortable in the heat of summer and now the winter. We don't wear shorts in the summer so we cannot report on how they fare during the summer in that aspect. Everyone thinks they are the factory leather seats...not seat covers. The color matches perfectly with the grey Honda interior.

I was skeptical at first but decided to roll the dice and make the purchase. Seat covers arrived well-packaged and protected. To be honest, the instruction manual that came with served little information so that was the only downside. The plastic tool to tuck the front seat edges is sturdy and works well. Quality and stitching really done well. Overall material feel and look are great. Pictures on the site does not do it any justice, IMHO. Installation - front seats. I have some technical skills working on my own vehicles so I opted to unbolt the front seats to gain easy access to the OEM seat leather hangers underneath and to re-attach the ones that came with the seat covers. I also watched the install video to prevent mistakes and having to redo it again. Be careful reaching under the front seats as there are wires that control the power seats and seat warmers. Remove both front headrests before installation. If you have slim arms, then you may be able to install everything without unbolting the front seats. The hardest part if you do not unbolt the seats is to unclip the OEM leather seat hanger clips. There is little to no space between the floor and the bottom of each front seat. This part is essential so you can raise the flap that is by the back seat footwell tucked under the seat. It is needed to access and pass through the new seat covers when you tuck them in from the backrest and seat to strap them together. TIP: do not remove the cloth material that covers the velcro on the new seat covers until you are ready to press them together. The cloth strip prevents the velcro from catching and sticking to the factory carpet or footwell covers of the OEM seats. Overall fit is really snug and looks like OEM. A bit of wrinkle around the shoulder backrest but some summer heat will stretch it:-) Installation - rear seats - literally took me 30 minutes from start to finish. Easy access to seats and backrests as they fold. The center folding armrest is accessible by unzipping the new cover and velcro from the front. Works well. Overall I am happy with the final results. Looks like OEM. Great product! I will post pics later.

I am extremely impressed and happy with the quality of the material and craftsmanship! I watched the video for my specific application, and it took about two hours to install. It's not difficult, but you have to take your time with the tight spaces and to get the right fit. The covers fit perfectly over the seats, and the material feels very luxurious and thick. There is no smell. I highly recommend these and would buy them again for my next vehicle. Great value too!

Overall I am VERY pleased with this product. I was worried that they Gray and Black would not match the interior of my 2018 CRV which came with the Gray cloth seats but it definitely exceeded my expectations. They look SO GOOD! Totally worth the money as far as quality but just as others have mentioned, you must be forewarned that these are not easy to install and take a fair amount of time and patience. The video provided (via Amazon) really helped but I would not recommend installing them on a warm day in the sun because it is quite a workout without the added elements. The hardest part was shoving the leather in between the seats and pulling it out the other side. I had to ask my husband to help me pull them through so they were tight enough. It also didn't help that the driver side seat cover was mislabeled so it probably took me an extra 45 minutes just to figure out what went where. All in all this 40 something mom was able to install it mostly by myself💪 and the result looks amazing. As I said in my title, it was well worth the wrestle!!

Front seat covers are great. Fit great. Look great. But the backseat has what can only be described as slits made with a pocketknife. When reading the reviews of this product someone had complained there were no holes for the car seat anchors. So I guess they decided to rectify that problem after the fact. This has totally ruined the look and durability of the covers. It looks like crap. These slits were totally unnecessary and has destroyed what was a fantastic product. I would love for the seller to replace these with uncut seat covers. I'm now debating about returning the whole thing. And that sucks because the covers in the front are in already and look great. And as my husband said "it's not like it's a 20 minute install". Update 11/18/19: I contacted the seller who responded right away and is shipping me replacement backseat covers a.s.a.p. Upgraded my rating from 1 star to 4 stars. Will update again with pictures once I receive the cover. 12/03/19: Received the new cover yesterday. I have not had a chance to put it on yet as I don't want to do it outside in the cold. But it does not have the slits cut into it and appears to be exactly what I wanted. This is a great product and the seller was very responsive and had great follow through correcting this issue. I love the look of these covers. Even though my vehicle is brand new I think these covers really add a great look and fantastic protection. Highly recommend.

Best money spent

The quality seemed good at first, but I am very disappointed to find there are no cutouts or spaces to secure a baby car seat! Since I have two car seats for the back row, I am now deciding whether to return the cover or manually cut holes into it to make it work!

The seats were not easy to install - lots of tugging, pushing and reaching into tight spaces - but the end result was very good. I'm very happy with the fit and feel of the materials, and I've had no issues after 30 days of use. As a bonus, the Customer Service team was also quick to respond after I reached out.

What an excellent product it looks exactly like the company's fitted seat covers the quality of the seat cover is very good My CRV inside look like a posh luxury SUV now I am very happy with the product

Hi, So i purchased this ones months ago, im from here Alberta Canada, and this is straightforward I'll tell you guys, you need a professional upholstery shop who does the job... for my Honda 2019 CRV EX... with all the electrical stuff underneath it is really hard to figure yourself out even with the videos and manual on hand.... so for myself it coz me $256 CAD for the labor work in upholstery shop. All satisfied. The shop said it is really nice lookin leather. I know its synthetic but I guess it does it job. Overall, Its a nice colour texture not so flashy seems to blend well with the interior of a 2019 honda crv ex Canada model. About the severe winter season coming up... we'll see if this one would be efficient heating still underneath on stock heated front row seats of honda itself.