Cup Turner,Tumblers Spinner, Cuptisserie,Rotisserie Kit for Stainless Steel tumblers,Glitter Cups, epoxy and Vinyl Crafts

Description

CratBay Cup turner kit made with PVC pipe and rotisserie motor. Motor provides two direction turning capability. Starter kit includes: 1 x Synchronous Synchron Electric Motor 1 x a set of 6 planks 1 x a white 25 mm diameter pipe 1 x a set of couplings 1 x a retractable foam. You will need to screw the planks and arms to use. These can be used with a variety of cup sizes. If you have any questions please feel free to send me a message or contact me via email us! Choose us and Custom Electric Cup Turner for Making Glitter Epoxy Tumblers, Cuptisserie  INSTALL INSTRUCTION: 1. First, use a double-sided tape on both sides of the board for simple fixing and then use screws to reinforce. There are no screw holes, and the white double-sided tape is the side plate. You need to remove the white tape to fix it with double-sided tape. 2, then use the screws to secure the bottom plank. Note that the fixing of the board uses long screws, the fixing of the motor uses short screws, and the screwdriver can be used directly. 3. Install the motor. The motor is mounted on a wooden board with two wire holes. Extend the motor shaft into the large hole. Please note that when installing the motor, try to cover the large hole with the motor, which will be more beautiful and beneficial to the use of the rear connector. 4, the connection line, there will be 2 small holes behind the board, that is the line hole, the top is the power line hole of the motor, the bottom is the power line hole. Extend the two power cords into the raft first and secure them with the terminal blocks. Please note that the terminal block should be inside the raft, it will be more beautiful and safe. 5. Hit the connector onto the motor and fix it with screws. Connect the tube to the connector, then close the lid and secure with screws.