24-Inch Digital Torpedo Level and Protractor | Neodymium Magnets | Bright LCD Display | IP54 Dust/Water Resistant smart level with Carrying Bag

This is not a bad leveling tool to have if you are trying to get something that is both digital and analog in my opinion. The leveler is magnetic which makes it easy to put it up and free up your hands. The magnet is pretty strong so you do not have to worry about it falling off which is nice. There are several different ways to level and they are the digital screen or the usual way with the tub and bubble. The device does come with batteries already installed but that is the annoying part. You have to actually unscrew the panel to access the battery which can be annoying as you need a bit of a small screw to get to it. This can be a hassle especially if you are already on the job. The nice thing is that you are able to just use the bubble level if you need to get a reading. The screen is pretty easy to read and bright. The screen is a bit prone to scratches though so be aware of that. The controls are simple button controls so you do not have to really have to worry about any touch screen. The button prints are okay but they do rub off especially on the job. The actual leveler is made of pretty durable material. It had no cracks, bends, or breaks on it. The design is pretty much a standard leveler but there is just a digital reader in the middle. The reader is pretty accurate. I have had no issues with the reader not giving an accurate read. The bag is not bad but I wish it had a bigger zipper opening. I am not a fan of sliding the leveler on one end as it cause it can get caught and not go all the way in. The zipper is also a bit fidgety in that it can get stuck so just be careful not to force the zipper closed. Overall this leveler works great for me so far. It is pretty easy to use and it gives an accurate reading. The screen is bright and easy to read. The interface or controls are pretty easy to learn as well. The down side is that the bag provided you have to slide this leveler in. I wish it was a full bag you can open to make it easier. The bag is still durable and great for storing the unit. The magnetic part is pretty strong so you can easily put it against a metal post and make sure it is level. The bubble level is also an option in case the battery runs out. The battery cover should be a big easier to access as well. You have to unscrew several screw to reach the battery which makes it annoying to change out as you need to use a small screw driver to get it. Other than that, this was a good tool to get for my dad. He can use it on the job sight without any worrying.

I love a nice, digital tool. They always feel next-level (pun intended?). Previously, I purchased a smaller, 12" digital level and thought it was great, but when it came time to pick a present to give to my dad, I decided to get this 24" one for him instead. This digital level is designed to look like the regular levels you will find at the hardware store, with its bubble levels in the vertical and horizontal positions. While many tools have unnecessary additions to the tried and true tools that have been around for a while, the additions made to this level are exactly what it needs. The strong magnet means that this tool can be hands free if you're working with a metal surface. You can leave it attached to the top or side of the stove and it will stay in place while both of your hands are free to adjust the legs of the stove. It will also work with a fridge and dish washer. The digital meter has a few functions that I haven't even explored yet but what I use most is the digital readout to get the exact angle and I'll use the freeze function to mark the exact reading so that I have time to write it down. Overall, this tool has good quality and great functionality. It's a great present for my dad.

I needed a level to set things at precise angles, for example, exactly 1.2° down or 0.0°. This level does the job perfectly. You can check a level’s accuracy by rotating horizontally 180°; it should read the same. This one is always spot on! It also has a small indicator to tell you if it’s sloping up or down. Yes, you could do fine angle measurements with spirit level and a little trigonometry (tan(A) = opposite/adjacent) but then you’d have to make small blocks for each angle and have a base for your level that you trust. In the photo, I’m using my spirit level to bridge a span that’s about three feet where I needed the downward slope to be 1.2°. This was just what I needed. It’s also rugged. I’ve dropped is two times on the concrete floor and it is still properly calibrated. (There are instructions for recalibrating.) I’m giving it as presents to family this holiday season.

The levels digital display is not properly calibrated, it does not give readings that are even close to correct. It did not come with directions on how to calibrate and the calibration button doesn’t seem to do anything. I am trying to find how to re-calibrate this level but can not find information on how. Update: I originally gave it only one star since it was not calibrated correctly and could not find out how to calibrate it because it did not come with instructions… So I figured it out… you have to hold down the CAL button as you turn on the power then it enters calibration mode and you can set the calibration by setting CAL1 then turning it and holding the button again to set CAL2. Hope this helps

Does everything described in description works well and very accurate

This product is fantastic, whether you're a tradesperson or a DIY enthusiast. It’s a reliable tool that includes a travel bag to keep it protected from dust and dirt, which is a nice touch. Using it is a breeze; you can check the plumb bubbles alongside the digital screen for maximum accuracy. It offers various modes, including inches, millimeters, percentages, and degrees, ensuring you achieve perfect precision instead of relying on guesswork. I highly recommend purchasing this product; it’s definitely worth it!

this product is great doesnt matter if you are a tradesmen or DIY this is a solid product. comes with a travel bag to keep out of the dust and dirt which is nice. very easy to use can look at the plum bubbles as well as the digital screen to be super accurate. you can flip through the modes for inches, millimeters, percentage, and degrees and this will make you perfectly accurate in your level instead of guessing. buy this product it is worth it.

After using the level for short time, I turned it on and Err appeared int he window. Nothing I do will remove this code or allow me to calibrate or use the level. There is o customer service contact inmformation on the information on the product or instructions. 'll try a different brand.

Worked really well for me. I am repairing/renovating a 115 year old cottage. Need the roof fall at 5 degrees? Easy. The log fence and gates? Easy. Cabinets truly vertical? Easy. The magnets hold on, the display is simple to read. My laser is great but needs setup. Trad bubble stick isn't getting used anymore. This tool is my new favorite and really useful tool.

Beau produit à première vu assez précis

This product works very well. You can set it on top of a 8 foot level and extend it. display tells you which way to adjust. My new go to tool for building anything!