MOOG K80820 Suspension Stabilizer Bar Bushing Kit for Toyota Tacoma

I don't normally write a review but these work great! I have a 2006 4runner with a 30mm sway bar. I had a clunk noise when going over bumps so I replaced sway bar end links and these sway bar bushings. Even though the end links did not help the noise, they were blown out so that's good. Next I installed these bushings and boom, noise is gone. They fit perfect!Be careful removing the bolts on the bracket. The nuts are inside the tube frame and lightly tacked in place. One side went from a 10min job to a 1-1/2 job. I don't know how long the bushings will last but its easy to swap so if it's once a year, no biggy.

These will fit a 2005 Toyota Tacoma for the front, after replacing these the steering clunk disappeared from the truck.High quality part made in USA!Fast shipping too!

Working excellent.

2003 V-8 4runner Limited 4WD. If you are going to leave the factory skid plate in place to change these out then you need to determine whether you have the right length socket extension. Not all short 3/8 drive extensions are the same length and the head of the bolts that are holding up the sway bar bushing brackets line RIGHT up with the edge of the skid plate, unfortunately. It was also a little tricky to get one of the holes lined up during the reinstallation of the bracket so be sure to have a good long and thick screwdriver handy to line up the bracket to the frame bolt hole for the bolt to enter so you can start some threads.I am not sure I could feel much of a difference and worst of all I still have a clunk. My sway bar end links are good, new ball joints, whole new rack and pinion with inner tie rods. 3 year old ToyTech lift with Bilsteins that are still good and not leaking.This is still a good product and certainly worth the money and DIY time and effort. If for nothing else do this for the process of elimination if you are hunting down a clunk.

Fit could be better, it's a little loose on the swaybar

Easy install. Stopped the clunky sound from the worn out bushings. Fits 2009 tacoma

I installed the MOOG K80820 Suspension Stabilizer Bar Bushing Kit on my 2006 Toyota 4Runner to replace the old, worn bushings, and it made a huge difference. All the annoying squeaks and clunks I used to hear over bumps are gone, and the steering feels much more solid and stable.

Perfect fit made sturdy

Me gusta comprar solamente refacciones de Buena calidad para evitar andarlas cambiando regularmente, moog es muy Buena calidad y atravez de amazon las consigues facilmente y te llegan rapido.

As advertised!Well made product...after all its made in the USA! Easy to install and it does what is should. Installed in my Lexus GX470...and no more rattle from the front end...11 trips last year scouting for/elk hunting in the northern Canadian wilderness over rocks and muddy back-roads chewed away my old sway bar rubber bushings...the new cool looking bushings from Moog made my Lexus GX470 drive like new again...and it only took me 45 min to install. They fit perfect and are made of much better material than original rubber. Thanks Moog.

Parfait ! Remplace la pièce d’origine sans effort. Il reste juste à savoir s’ils vont durer plus longtemps que les originaux ( 7 ans ???)

No more front end clunking when going over bumps. Fits perfectly! Copper coat the frame bolts when installing.

Works as should