Buy anything from 5,000+ international stores. One checkout price. No surprise fees. Join 2M+ shoppers on Desertcart.
Desertcart purchases this item on your behalf and handles shipping, customs, and support to Senegal.
Lead-Free / RoHS 3 Compliant / REACH Compliant Product Highlights Safe for Use With Electronics Seals, Bonds, Encapsulates Resistant to Various Chemicals and Oils Non-Corrosive, Non-Conductive Flexible, Durable, Non-Degrading Withstands Moisture, Vibration, Abrasion Common Uses Protecting, Sealing and Insulating Corrosion Sensitive Electronic Components and Electrical Materials. OEM Commercial and Industrial Manufacturing for Flexible Permanent Bonding and Sealing. Instructions Surfaces should be clean and dry. Unscrew cap, cut the tip off. If tooling is required, do so within the first 10 minutes after dispensing. Apply the silicone to surfaces and remove the excess silicone after tooling with a dry clean cloth. Allow the silicone to cure completely. At room temperature, 25C (77F), and 50% relative humidity, the silicone will skin in 10 minutes and fully cure in 24 hours (1/8" bead). The silicone will reach its maximum adhesion in 7 days. Higher humidity accelerates curing. Specifications Meets and Exceeds: ASTM C920, UL Recognized VOC: VOC Compliant (36 months Transportation This product has no shipping restrictions. Shipping below 0C (32F) or above 25C (77F) for normal transit times by ground or air will not impact this product's stated shelf life. Review: Works well - In building vintage tube amps, I needed something that would hold down caps, lock fiber board insulation in place. I could not find the stuff recommended from the hardware store. This worked really well and I use it constantly now. Review: Great Product... Set up time requires patience. - I was looking for something to secure torroidal cores/inductors and a transformer to my PCB on a radio project and it was easy to apply. Precise application (a dab on components) and a dab on nuts to secure and prevent loosening. Give it a couple days to fully cure and it IS Tough! This has made my finished board more robust and durable for travel. Highly recommend. Some reviews are out and out inaccurate... this is NOT silicon grease and Not a Traditional Adhesive as in glue.... it is similar to a caulking sealant, only in a small tube for small applications.
| ASIN | B07PG9X9L8 |
| Best Sellers Rank | #30,382 in Industrial & Scientific ( See Top 100 in Industrial & Scientific ) #74 in Silicone Adhesives |
| Brand | Chip Quik |
| Brand Name | Chip Quik |
| Color | White |
| Compatible Material | Industrial |
| Customer Reviews | 4.4 out of 5 stars 567 Reviews |
| Item Form | Gel, Paste |
| Item Weight | 0.01 Ounces |
| Manufacturer | ChipQuik |
| Material | Silicone |
| Material Type | Silicone |
| Model | EGS10W-20G |
| Number of Items | 1 |
| Part Number | EGS10W-20G |
| Style | Industrial |
| Style Name | Industrial |
| Supported Standards | ASTM C-920 |
| Surface Recommendation | Electronics, Corrosion-sensitive materials, Chemicals, Oils |
| UPC | 708210647625 |
| Water Resistance Level | Waterproof |
E**E
Works well
In building vintage tube amps, I needed something that would hold down caps, lock fiber board insulation in place. I could not find the stuff recommended from the hardware store. This worked really well and I use it constantly now.
G**R
Great Product... Set up time requires patience.
I was looking for something to secure torroidal cores/inductors and a transformer to my PCB on a radio project and it was easy to apply. Precise application (a dab on components) and a dab on nuts to secure and prevent loosening. Give it a couple days to fully cure and it IS Tough! This has made my finished board more robust and durable for travel. Highly recommend. Some reviews are out and out inaccurate... this is NOT silicon grease and Not a Traditional Adhesive as in glue.... it is similar to a caulking sealant, only in a small tube for small applications.
A**.
Works as advertised, definitely recommend!
Used this to glue down a circuit board to a plastic base and it remained in place perfectly! Only thing I would say is that the recommended 24hr bond time might be a bit off. Once you apply the item, definitely let it sit for the full 7 days before attempting to move it at all. Other than that, 10/10 product.
J**.
The right product to mount capacitors
This silicone has the right amount of adhesion to secure larger though-hole radial capacitors to the circuit board. It also has the other important properties for electronics, and can be removed without damaging the board. Very small tube won't last long if you do a lot of this type of work.
R**L
Excellent
Excellent product
L**P
electronics grade silicone
easy to use. drys quickly
M**T
Tiny Size! 0.7 Ounces should be the measurement listed not 20 grams
Standardized Measurements would be nice! It is also not an adhesive (which I am aware of) but it is misleading to others. I use this compound to seal the ends of custom length LED strips for outdoor installations. So I go through a lot at a time. While quickly needing to order some for a project I selected this as I use ChipQuik for Flux. I ordered thinking it was a nice price for something the size of the ASI 388 2.8 Ounce tubes that I normally use. The deceptive use of grams instead of Ounces made me assume I was getting 2 Ounces of the stuff not 20grams. I was not happy to see that I received a tiny little container of Silicone. I now have to not use the Amazon App for purchases as these details are too easy to miss on a mobile device. Amazon refunded it without a return (thanks!) but I still have to order a proper sized one as this is not nearly enough to finish a project and I doubt it will stay uncured for long after opening.
J**9
Great for sub amp repair
Works. I used this to secure some protect/secure some leads on a repaired sub amp. No issues.
J**D
good sealants for electronics
i dont think these should be called adhesive if they dont even bond as well as B-7000s. these are sealants used for sealing small openings or gaps like in between phone screens and chassis. for that purpose it does its job well.
P**R
Fast delivery
good product, but tubes tend to split at base seal
C**N
Silicona para electronica
Muy rápido a llegar, y perfecto medida para un proyecto com muchos componentes para afijar, lo recomiendo
B**.
Go easy on pressing tge tube to get the product out.
Worked great but, the back end of the tube failed so I had to scrap the silicone that I did not use on the first go.
I**S
Perfecto.
Realiza perfectamente su función, este tipo de siliconas de grado electrico son ideales para sellar soldaduras de estaño.
Trustpilot
2 months ago
2 weeks ago