Lovermusic 82mm Black Plastic Closed Shell Electric Guitar Single Coil Pickup Covers Pack of 3

I love the way these look on my Strat. The only issue is that they are not deep enough to cover all single coils. It does not affect my guitar because you cannot see what's underneath the pickguard, but the pickups are a little more exposed because these do not fully cover my Fender single coils. I have not noticed any difference in tone, which is very important to me. I was a little concerned it might mute the tone, but this hasn't been the case for me. Would I buy these again? Probably. I might try another brand just to see if it would fit the depth better.

medida estandar muy buena calidad, solo recuerda que tus pastillas no deben de sobre salir los imanes redondos debe ser superficie plana.

they cover your pickups and they look great. be aware, if you have pole pieces that stick up out of the pickups, if you tighten these down too hard the pole pieces will deform the nice flat surface, permanently. so either use them with flat-top pickups or just don't tighten them too much, or use some form of spacers between the cover and the pickup so they don't crush down over it.

Not an exact fit but with some minor modification it works fine and is what I was going for in terms of appearance.

They worked for my dinky. Sanded them a little to try to match the 81. They have nothing inside them and they sit flush with the top of the body. I had to use foam to lift them a little but that's because of what I'm doing with them.

Well, Let's start with it was supposed to be 3 (Three), there was only 2 (Two)... And unless you're installing on a set of tele-caster style pickup, it ain't gona work... They are (NOT) standard single coil size, and if you have raised poles... fugggedaboutit .....They should mention that, I mean why sell it if you know it's going to be returned... is it a money borrowing scheme? Needless to say, they get to "borrow" my money for another week due to slow return rates.. TELE Style Pickups=GOOD, Standard Single Coil=BAD.. Waste of $$.

Bought this to put on my seynmour duncan ssl-1 and ssl-5 pickups on a project guitar. I struggles to get them to screw into the pickups, a little too tight but after some work it did fit. I recorded a demo of an after and it made the pickups sounds like plastic, removing them now because getting the pickups in the first place was to get rid of the old plastic tone the original ones had. They look really really cool though, but make sure to measure your pickups first.

Went on good, fit tight dont move around and i cant tell any loss.