Kenwood KAC-9106D 2000W Monoblock Class D Car Audio Power Amplifier

Considering how long these have been out they hold up pretty great and is one of the prettiest amps out there that I have seen. You should not push anything lower than two ohms if you want this thing to last. I’m replacing this with a 2k stinger as I pushed 1.6 ohms till something in the amp failed, took a couple hours though. Perfect amp for something that’s not all about the wattage and maybe just more for aesthetics because there are cheaper price to wattage options

This amp pushes both of our .5 Cubic Feet sealed for each 10" Rockford Fosgate P3 Shallow DVC (2ohm/2ohm) @ 600 Watts RMS for both subs running a Series/Parallel Connection to both DVC Subs resulting in this amp puching 500 RMS Watts @ 4 ohms to these ear wax moving King Crew Cab Pounders! (2016 Ford F-150 under rear bench seat barely visible) This amp will pound & Pound & POUND in this configuration barely getting warm. Speakers SOUND tight, just when I think they cant hit any harder.. they do.Other Pros this amp offers:High-Level Input, this is great not only to avoid wiring to the head low-outputs rcas, but it also allows you to skip finding an Ignition Remote Wire and wiring it because the high level input is "auto-sensing" not requiring you to run the Remote Turn on Wire. $ Just give it a couple high speaker inputs (We used 60 watt per side highs from a Sony head unit/amp and it worked fine even though the manual says high input is 50 watts RMS max) and a power wire! and you are ready to go. AND GO STRONG YOU WILL If you know how to properly use its god given gift to push insane amounts of juice into your drivers.

Bought this to drive a Kicker 41VL7122 12-Inch Subwoofer in Vented Enclosure (also bought on Amazon). I was a little hesitant/skeptical of the power rating but was pleasantly surprised! This amplifier was a perfect match for the Kicker L7 12. Amp produces good clean power and doesn't get hot. Has been rolling around behind the factory sub trim panel in a 2016 Ford Edge SUV for over a month and we've been hitting in excess of 106 degree F days here in Texas.Would give it a 5-star review if it came with a remote bass knob. I used it with a RF DSR-1 so I was able to use a bass knob with it to control the level of the Kenwood amplifier. If this amp came with a remote bass knob it would be perfect!Would definitely purchase again.

I got two renegade 12in subs in my trunk that are beautifully singing now that everything's hooked up. I guarantee all the one star reviews have something wrong with their set up, not the amp. I did have issues properly grounding my wire so it was cutting in and out at first. Moved the ground wire to a more conductive spot, haven't had an issue since. My subs are 300 RMS each, so I bought an amp that slightly bigger than that. If you buy an amp that's too small, it won't work the way you want it to. Even if you do have it installed by a professional audio shop. Be honest with yourself, if you don't know what you're doing, ask someone for help choosing an amp that is right for you. Obviously the speakers are important, but if the amp is wrong everything else will be too.

Didn't work hooked it up no power. Waste of time and money

Outstanding power to my 2 12" kicker comp r subs. Unfortunately had a compositor hooked up that stared going out and sent to low of voltage to the amp wich caused it to go in to pertect mode and not come out. Needless to say still buying a new one

I have two 400-watt Kenwood subs running on a 2-ohm parallel with this amp..It's beautiful! has a 1000-watt peak with a 2-ohm setup. bumps HARD AND still has that girthy deep sound (ported enclosure). Highly recommend!!

Got two 4 ohm 12s wired down to 2 ohms seeing as at 2 ohms it’s supposed to do 1000 watts. . It sounds amazing but the amp gets pretty damn warm after a good 30 min or so . . I recommend not putting it in any tight spaces also do not cover the amp as that will make it even hotter then it already gets. . Also the power and ground terminals are kind of small for true 4 gauge wire. . So I used 4 to 8 gauge wire reduces and it fit just fine. .