For Honda Accord Cg Red JDM Sport Suspension Front Upper Strut Bar Brace Aluminum Performance Racing Stabilizer Adjustable Tower Handling

Brought this for a 98 v6 accord (6th gen with the j30a1 engine)Very nice red color, however the product was different from the picture as the mounts were a total of 5 bolts on a circular mount instead of the pictured 2 bolts c shaped mount.Had to do some mechanical work in order to fit. Total of 16 bolts of various 10mm, 12mm & 14mm were removed.You will have to remove two 10mm (number 6 & 4 on picture) to drop down the fuel line to allow product placementYou will also have to use a metal saw to cut off the piece on the bolt on strut to fire wall to allow product placement it's a piece that holds the accel line (number 1 on photo)You have to lower the bolt on struts to firewall by removing 5 12mm bolts.(Number 7, 8, 9, 10 & 11) Just mirror for the other side. 7 & 8 (and 5 &3) are hidden by that little clip on cover over them which is easy to remove.You may not have to cut the plastic piece (number 2) I did so with intent to fully remove them but realized that they could have stayed on later.***Lowering the left side firewall strut lets u drop the cable wiring down & screw in the allen(hex) to allow the product to fit.***Lowering the right side firewall strut lets u screw in the allen(hex) bolt to allow the product to fit.For the allen(hex) bolt I used a vice grip to hold the side I could not latch on with a regular ratchet & socket and tighten.Drive test results: I feel it's much easier on my cars handling at various speeds with this item installed, not as wobbly as before going ~60mph turns and during short quick turns at ~30 I can definitely feel the car respond a lot better to the sudden change of direction." Honda Accord CG Red Jdm Sport Suspension Front Upper Strut Bar Brace Aluminum Performance Racing Stabilizer Adjustable Tower Handling 5/5 would recommend to friends with tools."

BEWARE. The picture is NOTHING what the product you will get looks like... You can clearly see a curve so you can get more clearance. Also the brackets are nothing like that are in the picture. Also it looked used because it was all marked up. Also BEWARE they will NOT pay to ship it back..

I got this for my 1999 Honda Accord v6 and it looks very nice. It does not come with instruction but is simple enough. It's worked very well for about three days and then the bar started to bend. Over the next week it bent more and more and now almost has less effect than the factory strut braces. It is not made well so don't waste your money.

It’s fit perfect. Real easy to install, looks good.

Didn't fit my car still hve it no use for it

Doesn't even fit the 2001 accord 4 cylinder. Needs to be bent to fit

Looks good, easy to install, doesn't bend