Air King 18-Inch 1/6 HP Industrial Grade High Velocity Multi Mount Fan with 3-Speeds, Pivoting Fan Head, Durable Powder-Coated Steel Blades and Guards, for Industrial & Commercial Spaces, 9318, Black

Northern California summers are ridiculous at 100+ degrees and this fan was a perfect addition to help keep it manageable. I recently replaced my garage door with a thick insulated door, but the air can still be thick and hot. After a ton of research on various brands, fan blade size, noise level, cfm, etc, this fan was at the top of the list. I'm glad I bought it. It moves some serious air (max 3,190 cfm on high), while drawing only 1.5 amps and at a reasonable noise level (I can comfortably watch/hear the Dodger game). The fan alone dropped my ambient temperature in the garage down approx 6-8 degrees. Definitely a solid purchase. PROS: - The ability to mount this on the wall is great. It keeps the floor clear. - 180 deg rotation is handy. I didn’t think I’d use it as much as I do. - Noise is very reasonable. On low, it just becomes white noise. - High air movement - Long power cord. Made it much easier to mount and plug in. CONS (sorta): - The balance seems to be slightly off. Mine has a very small vibration on medium. Not a deal-breaker though. - The pull chain looks like something from grandma's ceiling fan. It does the trick though. Mounting tip - Have someone there to help mount this. It's awkward to drive in the lag bolt while holding the fan at the same time. I’d recommend min 2.5” lag screw into stud or post. If you add an extra (wide) washer in between the steel mount and the wall, you can get create a swivel pivot point to allow the fan to rotate a few inches back and forth.

I've been using these for 2 years in the stalls in my horse barn. I have them plugged into a switched outlet so I can just flip them on and off. They get a lot of use and no problems with them. The horses LOVE them and they'll position themselves directly under them. Keeps the air circulating and the stalls nice and cool. They move A LOT of air, and they're a little loud. But it doesn't bother me or the horses. I only need 1 in each 12x12 stall. They don't get rained on our anything where I have them, but they are exposed to heat and humidity and no issues after 2 years of use. I leave them out there all year so they are also exposed to below freezing Temps. About to buy 2 more to mount in the aisleway.

OK, I admit the title is a little corny, but I was not in any way disappointed with this fan when it arrived. It is obviously well made, has 3 speeds and moves a lot of air. I mounted it on a wall in my workshop to help me cope with the hot, muggy weather we have here in Florida during spring and summer. You can stand a good 15 to 20 ft. away from it and still feel a breeze, which is exactly what I wanted. It can be mounted with the bracket horizontal for up and down adjustment, or vertical for side-to-side adjustment. It only has one mounting bolt hole in the bracket, which seemed a little strange but I used a 7/16" bolt (I believe the manufacturer recommended a 3/8" bolt) and it is solid with no noticeable vibration at the higest speed. You can hear it when its running but for the amount of air it moves I think the noise level is very acceptable. If you need air movement in a large room, you can't go wrong with this fan.

We have a few of these at my job. They move a good amount of air so I wanted one for my garage. Works great!

Love these fans for livestock. We have 5 of them. Sound is not bad considering the amount of air it circulates. It doesn't vibrate. It mounts beautifully anywhere and can be turned to where you need it to go. The safety cable is useful. We only lost one fan due to the chain pull came out of the backside and seems to not be a fixable solution.

This fan is awesome! We love it. Mounted it in the bedroom for some sleep noise. This thing can move some air.

NIce wall/ceiling mount fan. Moves lots of air, heavy duty mounting bracket. Not too noisy, 3 speeds are a nice feature. Well built, shroud is heavy gauge steel. Long power cord. This fan is great in my shop and would work equally well on a patio.

We got this fan last summer to mount on our lanai. Florida summers are brutal and I spend a lot of time on the lanai watching the kids in the pool and our standard ceiling fan barely put out a breeze. We tried a few plastic box fans but none could really cool down this space. So last summer I convinced my husband to get this fan and mount it on the wall. It was quite an undertaking as this thing is heavy! But we have it mounted and it really moves some air! We have it mounted higher so that it's tilted downward, much like restaurants do in their outdoor seating areas (which is where I got the idea). I usually only need it on low or medium and it really cools the lanai. High is too windy for me and kind of loud, but my husband likes that setting best. The only negative is that anything on our patio table not weighted down will blow away! This fan does not oscillate but it can be tilted if needed. If you need to cool down this is the fan!

Bon ventilateur, pas trop bruyant. Ça va très bien.

We use this fan for additional air flow for our split system A/C quite and powerful.

Love this machine out doors. The smell of my next door neighbour's cooking is gross and as my windows face their vent my house smells of their food. Not nice n/bours as they did not want to put up a tube going up. I have this fan on facing their house every time they cook. I have also put trees along the fence. I have made a cover for it and it is put away in the winter.

Have had the hanging for 4 years. Canadian winter and summer. No issues at all

Seemed like it was well made. Unfortunately the low grade switch broke within a month of very limited use. Fan seems decent. Switch assembly is junk!!! More landfill crap from China.