6.5-Inch Cast Iron Skillet, Pre-Seasoned Cast-Iron Frying Pan with Long Handle, Made in Colombia | Pan with Long Handle, Made in Colombia

Just received this pan. It’s just for the one egg for sandwiches. Size is good and the pan is heavy and good quality. Most of my iron and cast iron pans are very well seasoned and cook food amazingly. It’s a lil effort but the food tastes better and without unknown chemicals. Most if the times just charring onion in oil makes them nonstick. I add oil and onions in it and keep it on low until onions are almost dark brown and discard them and cook any food in it and it works like non stick. For one egg this is a perfect size pan and if seasoned well. Works good as well.

Great little 6.5” pan, surface is smoother than lodge and the handle is longer than a lodge pan of this size. Also, it seems to be easier to clean. I bought this one because my lodge 6.5” pan was in storage. Seasoning holds up well. I would definitely recommend Victoria for anyone interested in inexpensive quality cast-iron. I was curious and bought two yeti pants, which are great, but they don’t make one in this size. And I don’t think they really perform any better although I’ve only cooked sausages in this pan.

OK, I wanted a cast iron skillet because I was tired of buying non stick pans with bad for me coatings that flaked off. Cast iron pans are cheap but scary for a couple of reasons: seasoning and weight. So, after reading food blogs and ratings for weeks on the Internet, I decided Victoria was best for me because the factory seasoning was supposed to be better out of the box and the 12 inch pan was 1.1 pounds lighter than Lodge with a longer handle and a better helper handle. So I got a good deal for a few bucks more than Lodge and here are the results. (1) SEASONING. Even though the factory seasoning is supposed to be good, everything I read said you must enhance it for the best performance. I enhanced the seasoned by heating it on the stove, wiping it all over with Cisco (if it was good enough for Grandma, good enough for me), and placing it upside down in an oven at 500 degrees for one hour, let it cool in the oven, and wipe off excess, if any. I did this 4 times. Some people recommend 6 seasonings but the pan had gotten really dark and black after 4 so I called it quits. Every time I use the pan I wash it out with water and a scrub brush (no soap), put in on the stove over medium heat to dry, wipe all over with Crisco, let it set to cool off a bit, and then wipe off excess. Avoid using paper towels when seasoning because they leave little bits of paper behind and that is not something I want included in my seasoning. Use a lint free towel instead. After only six weeks, I am thrilled that my eggs (using a pat off butter) slip around this thing better than my non stick pans and they cook more evenly. (2) WEIGHT. I have some arthritis issues in my hands and back. Was I crazy for getting a 6.6 pound frying pan? I sure as heck wasn't going to be tossing stir fry or flipping omelettes in this baby. But with that extra long handle and the nicely designed helper handle, I can move this around pretty well. You always have to use oven mitts because the handles gets screaming hot but still it isn't hard to hold onto. I can brown a nice pork loin roast with rub on all sides in the pan, remove, thrown in some root vegetables and onions and toss in oil, put the roast back in, throw in the oven at 350 degrees until roast is 145 degrees ( about an hour) and have a great one pot dinner with fabulously carmelized vegetables without killing my back. The frying pan is lighter than a cast iron dutch oven. Have you tried cast iron pizza? It is the crispiest pizza crust I have ever eaten. Corn bread? Yum. BOTTOM LINE. A cast iron pan is incredibly versatile. My Victoria 12 inch cast iron frying pan is well-designed, lighter-weight, incredibly well-seasoned after only 6 weeks. It is an amazing value that I expect to last the rest of my life. I am having a heck of a lot of fun discovering a new way of cooking. Although there is a new rule in my house, no one touches my cast iron but me!

I purchased this skillet and noticed that there was continual rust in the same area and uneven and sticky patches after a few uses. (Note: it is delivered a very dark gray color so prior to using it I seasoned it in the oven, upside down, with grapeseed oil 3 times) I contacted the company and they asked me to send in pictures and recommended that I scrub it with a stainless steel scrubber and then re-season it and continue cooking with it. It did not help, only scratched it up but the rust and patches remained so upon reaching out to Victoria again I was told to send in more pictures and kindly asked them to stand behind their product. The response was that they would make an exception send another pan once they received the old one. I was sent a return shipping label with my address as the 'ship to' address and noticed it after dropping the pan off so ran back to retrieve it so they wouldn't be charged since the label would just ship the old pan right back to me. She realized the error and sent the correct mailing label and mailed a new pot out. All of this to say: it is possible to redeem the warranty with Victoria but the process took 3 weeks, their response emails are not timely, and it takes convincing for them to honor the warranty. The new one: I just started using it when I received it, no pre seasoning, I just heated it up on the stove and rubbed some oil in it, stored it, and started cooking in it days later. I think the handles are ergonomic, I like the size, its not too heavy, and I got it for a GREAT price! Can't beat a $14.99 cast iron skillet. Is it the best quality, smoothest cast iron pan out there, no... but for the price, even at $24.99 it's a great deal. It still does have uneven areas that are a little sticky but I'm not complaining, especially for the price. I do care about aesthetics which is why I baby my Le Creuset enameled cast iron, but since this is not enameled I used it for higher heat searing, frying, and dishes that require very high heat. I seared some scallops in it and they came out beautifully. It's big, see pic of fried shrimp. Do: clean it with warm/hot water and a soft scrubber sponge, if you have hard stuck on food use hot water and a metal spatula, dry it completely immediately after washing (i put it on the stove on low heat to dry it), thin layer of oil once completely dry Don't: leave it soaking in water it will rust, use a pizza cutter directly on it (it will scratch it), cook acidic dishes like tomato sauce in it unless its older and well seasoned I'm usually not this long winded but prior to purchasing I would have appreciated this. Hope it helps! Happy cooking!!!

Lovely Pan! I gave up non-stick pans long ago and have been cooking eggs in a stainless steel Cuisinart frying pan for over a decade. If you want no stick on a will-stick pan, you gotta learn what they want. For my 8" Cuisinart, I set it on the small electric burner, turn it on to medium (5), and set the timer for 6 minutes. At 6 minutes, add a dab of butter (and for me, I do mean just a dab - only enough for a thin coat where the egg will sit), then add the egg for scrambled or over-easy. No stick. Begin sooner than 6 minutes, it sticks. Basically, if your pan is too cold, the food will stick. If it's too hot, it may stick and will burn your food. Ya gotta find that sweet spot where you food browns nicely without overcooking. Know your burner; does it run hot? Use a timer, check your results, and test til you find it. You can do it, and it's worth it. This is my second time using the Victoria Cast Iron, first time with an egg. The pan came pre-seasoned which I'm glad of as I'm not interested in that; I'd rather learn my pan and burners. The first cook was steak with some butter to welcome the pan home. Followed the instructions that came with it: washed with mild soap and warm water, towel dry. No problems. For this egg, the burner is large and heats up faster, so I set the timer for 5 minutes but only needed a bit over 3. Small dab of butter, and walla! No stick. Deliciously cooked evenly throughout, tender but with crispy edges. Better than my trusty Cuisinart! Regarding rust, the instructions say to never let it air dry. Also, it says to use warm soap and water, something I've not done before on cast iron. But I researched the brand well. They've been making this cast iron for a long time; I trust they know their metal. This pan is so much better than my old lodge, I can't even compare. Nearly smooth surface (read about that on their website), nice long, arched handle, and way bigger drip spouts that are wonderful. Bonus of beautifully etched logo on the bottom. Looking forward to a long and prosperous cooking adventure with this pan. Ya just gotta treat 'em right! Update 2/15/25: Tried making a grilled cheese: set burner to #4 for 3 min, but it browned the edges of bread too quickly (see first side). Turned burner down to #3 and covered it with a light pie plate to capture the pan's heat and melt the cheese quickly, but without sealing the pan which would cause steam and soggy bread. Pan was still too hot, turned it down to low/sim (#1) for 2 min and walla! the amazing side 2. The cheese (pretty thick slices of Colby Jack) was melted all the way through and gooey, the bread and crust was crisp but not hard. The sandwich stayed warm for most of eating it (I've found different cooking methods have different heat retention; call me crazy, lol). Probably the most delicious grilled cheese I've ever made! Next day I tried frying cheese right in the pan after cooking an egg (turned burner down to #3 for fried cheese). It melts quickly without having to broil it before putting the egg on top. The bit of browned cheese stuck in the bottom of the pan comes right off with the spatula and goes onto the bread. So yummy! This pan has become my favorite to try everything! Made delicious fried rice from leftovers that didn't stick at all. Love this pan!!

I own the 12" skillet, the 2 qt pot and the 8" skillet. I came across Victoria when looking for a basic pot. When you check out their store you will find they sell a number of unique items in cast iron. I was very impressed. When I purchased my 12" skillet I went with Victoria over Lodge because it's just over a pound lighter and those skillets weight enough as it is. When it came time to buy an 8" skillet I again went with Victoria. Victoria cast has a smoother finish than todays Lodge cast. It is equal to or sometimes slightly lighter in weight than Lodge. This is not cheap, light weight cast from an unknown company. This is heavy weight cast of superior quality, meant to last a lifetime. They use a different oil than Lodge when pre-seasoning that has a lower smoke point. Rather than jet black, the cast resembles more of a gun metal. Manufactures pre-season cast to prevent a pan from rusting. It is simply a base to work off of when continuing to season a pan yourself. You can season via cooking or through a seasoning process. I season mine but I had some scallops I wanted to cook did so straight out of the box. Amazingly they didn't stick. I will still season it. To season cast, use a quality, high temp, cook oil. I use grape seed oil. Wipe all over and then wipe it off. Place it in an oven upside down and cook it to 20-50 deg above the smoke point of the oil. Turn the oven off and wait for your pan to cool. Repeat so than you have done this 2-3 times. Every time you wash your pan, you wipe it down with oil and wipe off the excess. When you cook, pre-heat your pan. Cast cooks evenly but it takes awhile to heat up. Once heated, add your oil and turn down your heat to a low to medium setting. When your done cooking, add a bit of hot water to the pan & go eat. When your done eating, rinse the pan in hot water. It should be clean. If it's not, scrub with a stiff brush or chain-mail. Dull black is carbon, you don't want that. If you end up scrubbing down to metal, just re-season once in your oven. There is a learning curve going from aluminum non-stick pans to cast iron. Some pans take longer than others to season. Much of this depends on how you cook and what you cook. No worries, yours will pass the egg test in no time. If a pan gets a slight bit of rust. No worries. Mix up some citric acid or use lemon juice, it will come right out. Oil it and bake it in the oven.

Great skillet!! It comes preseasoned and, unlike othe manufacturers's skillets, the surface is smooth and less likely to cause sticking. Love this pan for a burger, grilled cheese, to saute some onions and garlic, you name it!!! I reach for this so often.

Take your cast iron out of the kitchen and onto the grill. Less mess, less odors. And you can get that skillet really, really HOT, HOT, HOT! Heard so much about this brand of cast iron skillets that I had to come to this product page and check things out. But I already have wonderful vintage, well-seasoned cast iron skillets from 14" down to 10". So my eyes zoned in on the 8". And I started thinking about all the dishes for one or two people--that I could accomplish on my gas grill. Preheat the gas grill on high for 15 minutes, and preheat an empty cast iron skillet at the same time. I imagined it, I pictured it, and I planned on it--but I was still surprised by the magnificent, simply-seasoned, bone-in, skin-on, chicken thighs that I created. It was so easy, and it was quick, too. And the skin was as crispy as what we wished for. Inside was succulent and juicy. I don't think I'll ever do chicken thighs on the kitchen cook top again. The smaller surface area contains the minimum of rendered fat from the thighs, just enough fat to brown up a few veggies or fruit chunks along the edges. The 8" size means that I can always find room for it on any of my grills. And one 8" pan fits 3-4 thighs, or two leg-quarters, several pork chops or two pieces of fresh tuna. Pre-heating the pan ensures a terrific sear. It is just the right size for onion and peppers or onion and mushrooms, or shrimp or squid rings. Carrying the 8" is effortless, too. "Dragging" the pan out to the yard is a non-issue with the 8". These 8" pans are cute, too, and can make it to the table if you coddle it in some suitable towels to cover the bottom and the handles. And I've confirmed what I've read: The handles are comfortable, the pour spout is a welcome feature (especially on this 8" which is so easy to lift and maneuver). And, as Epicurious says in one of their articles, the pre-seasoning is very effective. Love my vintage pans, but I'm loving these new 8" pans, too. (And, I'm working on a recipe to make individual de-constructed gumbo in these 8" pans pre-heated on a hot gas grill: A chicken thigh, a small sausage link, ample cuts and chunks of onion, celery, green pepper, a few whole okra, and seasoning. Rice in the cooker, and a thawed freezer portion of gumbo broth/sauce heating up on a grill side burner.) Sounds like a good plan to me--my 6-month old Electrolux induction cook top is waiting on warranty repair--for the second time! And this second time is into its second month! So I'm getting creative and am taking my cooking outside more and more often. (Don't buy Electrolux!)

Hice una discada y quedó genial Súper resistente y trae ya un buen acabado para poderlo usar desde la primera vez

Came with a thin layer of seasoning. Added many more layers in the oven. NOW ITS FANTASTICALLY NON STICK. AND I USE SOAP TO WASH MY PAN. NO ISSUES.

Perfect, no problems

Die Pfanne wurde unbeschädigt geliefert und funktionierte nach einmaligem Einbrennen (auf dem Ceranfeld) ganz hervorragend. Vielleicht war das Einbrennen auch gar nicht nötig. Beste Erfolge hatte ich bisher mit Braten von Currywürsten, Bratkartoffeln und dem Rösten von Erdnüssen. - Es bleibt nichts am Boden hängen, aber man muss etwas weniger Wärme zuführen als bei billigen Teflonpfannen, nicht umsonst werden diese Gusspfannen ja für ihre Wärmeübertragung gelobt. Ich denke, wenn ich mich weiter strikt an die nachfolgenden Regeln halte, werde ich an dieser Pfanne noch lange Freude haben. Was darf man nicht? - Die Pfanne darf nicht schlagartig abgekühlt oder hart angestoßen werden. Außerdem sollen leicht säuerliche Gerichte nicht in ihr zubereitet werden. Was soll man für den Erhalt der Pfanne tun? - Nach dem Abwaschen (möglichst ohne Spülmittel) immer sorgfältig trockenreiben oder auch zum Trocknen erhitzen und vor dem Wegstellen immer ganz leicht einölen. Damit beugt man der latenten Rostgefahr vor. Einziger kleiner Schönheitsfehler: Der Griff wird sehr heiß, man darf ihn beim Hantieren nicht unvermittelt ohne Handschuhe anfassen. Andrerseits möchte ich die Option des Bratens in der Röhre aber auch nicht missen. Ich bin mit meinem Kauf bei dieser traditionsreichen südamerikanischen Firma äußerst zufrieden!

Por fin un sartén fino y de calidad sin nada de recubrimientos que se eliminan con el tiempo y dejan residuos de teflón en el organismo. Se debe realizar un procedimiento de "curado" para que sea totalmente eficiente.