Aluminum Alloy Front and Rear Axle Housing Set for 1/10 Traxxas TRX4 RC Crawler Car, Replace Original Plastic Axles Housing (Red)

I have gotten several of these sets for multiple trucks and have no complaints . The Machining is so tight that with the anodizing they use it makes the bearings difficult to press in . You can use your fingers for a few , a socket for others but there is always one that is a bear . Its random which one it will be lol . But , there just made that perfect . The 3 little tiny screws that hold the outside hub came loose once after locktite . I just used a little more and they have been fine . They look really nice and I haven't scratched them up in Florida yet . No rocks here . I used most of the screws that came with it but on 2 of these kits , a few screws were rounded out already . No biggie . For the price , compared to others , you cant go wrong .

These housings are the best deal around. Machine work is perfect. I've ordered a few sets and only one had an issue where a screw hole wasn't tapped. Easy fix. You must remove EVERY screw and loctite, then let cure for a full 24hrs before using them. Otherwise you WILL have screws come loose. Bearings fit well, the added weight makes such a difference. If you're on the fence about getting these do it. You won't regret it.

I really like them but make sure you buy some blue loctite because these bolts will back out. And if you run 1.9 size wheels on your trx4 there will be some self clearing on the portals, or you can buy a wheel hex that’ll extend the wheels out.

Great quality fit, finish and machining on these axles. There were two connections that were a little too tight for the linkage arm pivot ball on the rear axle but that was easily fixed with some light filing. Also, be sure to individually remove and replace each screw with loctite as you assemble these otherwise they come loose very easily. These look perfect on my TRX4 red/black Bronco!

Los tornillos son de mala calidad, los engranes no entran, y los ejes no son compactos se sientes desajustados y hacen que las llantas se tuerzan muy mal producto no lo recomiendo

They seem well enough. Tolerances are super tight and my treal brass chubs had to be helped on with a hammer but it fit and everything works. The fact that they are a 3 piece axle is nice.

Most of the housing worked for me except for the caster blocks on the front axle the angles are off just enough that the axles won't go in so i had to use my original plastic caster blocks. Also the provided screws for the shocks are not long enough

Installed these on my TRX4 Sport. The installation was pretty straight forward. Everything for as needed, no grinding was needed. A few tips - the axles ship fully assembled, so you'll need to remove a lot of screws. So many screws. They'll all need to come out so you can lock tite them all. And you will want to lock tite them all. Also, do them one corner at a time, especially the front. That will reduce the likelihood of getting something backwards. Happened to me. Was during the dry fit so it wasn't so bad, but it's avoidable. I also recommend a hefty dab of marine grease in there to keep everything smooth and happy. Not sure if you can use too much.