43526 Premium Engine Water Pump | Replaces 252-318 5010964AA 5086959AA 5086959AB 20904 T2267 2-2141 943526 AW6158 CP6158 51-2475 55-2097 US7123H BWP-2141.

6months later still a great product I always buy gates brand for my diesel

Easy install, works well.

Gates products are top quality..been around for many years...fit perfectly

This pump looks, fits, and functions just like the OEM pump. FYI - My vehicle is a 2006 Dodge 2500 5.9L Cummins. This is the easiest water pump installation I have ever undertaken on any vehicle. There are youtube videos on how to do this but it is possible to replace this pump without removing anything other than the pump itself. The fan, fan shroud, radiator, etc. can all stay in place. Just loosen the belt tensioner, slip the belt off of the alternator/water pump/fan pulley, remove the old pump (two 10mm bolts, hit the pulley with a hammer to knock it loose), install the new pump, reinstall the belt, release the tensioner, done. I completed the job in easily less than an hour. The 'hard' part is getting the old pump out since it is surrounded by engine components. On my vehicle there is a tubular radiator fan shroud bracket at about the 11 o'clock position. Remove the nut from that bracket (no need to remove the bracket itself) and that will allow enough flex in the fan shroud to remove the old pump and squeeze in the new one. Be careful not to bang the pump into the back of the radiator to avoid puncturing a radiator core; they are pretty easy to damage.

Worked perfect on my 2001 dodge ram 3500 cummins diesel.

The water pump went on super easy. Took me about 20 minutes with a new belt

So far no problems it does the job.

This fit perfectly on my 2010 Dodge Ram 2500 6.7L Cummins Diesel. The construction of the water pump is very solid. The fins are made of metal (the stock pump I took off had plastic fins). There was no wobble or play in the bearing. It was definitely heavier and better built than the original. A few tips if you plan to replace yourself: 1. Have a friend help with the belt tensioner while you take off the serpentine belt. 2. Don’t forget to drain your engine coolant before removing the water pump. You will fill a 5 gallon bucket. 3. Be sure to clean around the edge of where you remove the old water pump before installing the new one. I used a light grit sand paper and some break cleaner to help clean the dirt off. 4. Don’t forget to put the new gasket in place and apply a light bit of oil on the gasket before putting the new water pump in place. 5. Check the other pulleys for wobble. I ended up replacing my belt tensioner as well (also Gates).

This pump has been on my cummins for many thousand km and has worked perfectly

Exact fit replaced 6 months ago no problem would buy again

I was under the impression that this Gates water pump was made in the USA , wrong, it was made in China!

Installed easily on my 2005 Ram 2500 5.9 Cummins, working fine and looked pretty well exactly the same as the OEM part. No complaints, great price (10% cost of dealer part!)

Didn’t come with new bolts.