PetSafe Happy Ride Metal Dog Barrier, Pet Gate Vehicle Divider for Cars, Minivans & SUVs

I needed a solution for keeping my two 100lbs dogs safe and separated from the passengers in my 2015 GMC Yukon XL.I decided to remove the 3rd row bench and the storage compartment in the trunk, which is nice for storing small items in it, but creates a slanted cargo area, which makes groceries roll right out of your vehicle once you open the trunk. With the bench removed you get a flat cargo area, which is just a bit uneven due to the bolts from the bench (which I put back in place after removing the bench) and the brackets holding the storage compartment. I put down a piece of 3/4 plywood wrapped in carpet - this results in a 48" wide and 55" long surface, more than enough for two big dogs and it gives you a nice surface to install the pet barrier.Installation is straight forward with clear instructions and is done in 10 to 15 minutes. I took some more time to make sure the uprights of the pet barrier were as straight as possible and I also fixed the bottom feet with some screws to my plywood floor. This way I can be sure that my dogs cannot knock the barrier over or out of place if they slam in it - in case I have to brake hard or they start goofing around in the trunk.Because the gate is installed behind the 2nd row bucket seats I needed to cover the lower space between the bucket seats so the dogs would not try to crawl under the barrier into the passenger compartment. Another piece of plywood wrapped in carpet did the trick and was zip-tied to the bottom of the barrier. That is not a fault of the product, just a challenge of my specific application.With the barrier installed I can fit items up to 4ft length in the trunk, if I need to transport longer items I can easily remove the horizontal bars with the quick release buttons, while letting the uprights installed.With the 2nd row seats folded down I can then fit 8 ft long items. For longer and wider items I abandon the trunk anyways and attach the cargo trailer... ;o)All in all a 5 star item - no complaints whatsoever. Solid made, clear instructions, no tools necessary for installation, easily adjustable in with and height and versatile due to the quick release function of the horizontal bars. I read in an other review the barrier would rattle... not mine, it makes no noise whatsoever - or at least no noise which I could distinguish from the general noise my Yukon makes when I go down a dirt road... ;o)

Works great, have used it in a BMW X5 and a Jeep Grand Cherokee.

Have 2018 Chevy Tahoe. With third row folded down, needed means to keep dog in cargo area behind second row. There is a 12" by 25" inch gap between the second row of bucket seats that I needed to cover.My dog is a 50lb shepherd. Very smart. I first ordered and installed a cloth net to cover the gap. My dog jumped over it. The cloth net covered about 70% of the gap but left 30% at the top open.Therefore, I felt what I needed was to cover the gap from floor to ceiling 100%.Decided to try the metal dog barrier.I think it's an outstanding product. I'm happy with it. It's noisy.Installation is fairly simple. I LOVE how I can adjust the width of the product. For other Tahoe owners, this product can completely block the width of the vehicle. Meaning, if I wanted I could fold down my second row of bucket seats and feel confident that my dog would stay in the back portion of the vehicle. We choose to keep the third row of seats down all the time and keep the second row enabled.I also haul stuff from time to time like long pieces of wood. I like how I can use the quick release buttons on the cross bars to quickly remove them so that I can slide wood thru.One odd occurrence...my smart dog tapped the quick release of one of the cross members and caused it to release and come off. I think it was a random tap of the paw. However, if your dog is epic smart...well, good luck.On the noisy part. If you don't care about noise, then this product won't bother you. I like a quiet drive. This product rattles. I tracked the noise down. It's the internal bars that insert into the larger bars.I wrapped the inner bars with painter's tape (the blue stuff) and this eliminated 80% of the problem. Now, only hard bumps from the road make the product clank. I had to experiment with how think to wind the tape around the bars. Both the inner bars of the cross bars and the vertical ones had to be treated.Overall, I'm very happy with the product.Shepherds...

I was loking for a Metal Dog Barrier for my family car, for our road trips with our furry friend.Sturdy and Reliable: The metal frame is incredibly sturdy and provides a secure barrier between the front and back seats. It keeps my dog safely in the cargo area, preventing any distractions while driving.Easy to Install: The setup was a breeze! The tension system and rubberized caps make it easy to adjust and secure the barrier without any tools. It fits perfectly in my SUV and stays in place, even on bumpy roads.Adjustable and Versatile: The adjustable design is fantastic. It fits a wide range of vehicle sizes and configurations, making it versatile for different cars. The barrier doesn’t obstruct my view, allowing me to keep an eye on my dog while driving.Quiet and Rattle-Free: One of the best features is the rattle-free design. Unlike other barriers I’ve tried, this one doesn’t make any noise, ensuring a peaceful and quiet ride.Convenient Storage: When not in use, the barrier disassembles quickly and fits neatly into the included storage pouch. It’s compact and easy to store, which is a huge plus.Overall, I highly recommend the PetSafe Happy Ride Metal Dog Barrier. It’s a well-designed, durable, and easy-to-use solution for keeping your dog safe and secure during car rides. A must-have for any pet owner who loves to travel with their furry companion!

My dogs are able to push it. Even when they don't push it it doesn't stay in place and eventually comes off. I did not return it because one of my dog chewed the screws that comes out toward the seats side. To me it's a waste of money.