INNOGLOW Motorcycle Turn Signals, 2pcs Heavy Duty Incandescent Bulbs Amber Bullet Amoke Lens Indicators Blinkers Lights for Harley Davidson Suzuki Kawasaki Yamaha (Black)

These lights are fantastic! They arrived promptly and in smaller than expected box, I was prepared for the worst that a cheap pair of turn signals could be. I was pleasantly surprised to find that these look and feel incredibly well built with a smooth shiny aluminum housing and what feels like a glass lens. The wire is copper and much better quality than I dared to hope for, it was incredibly easy to solder because the individual filaments were strong enough to twist and bend without breaking and they held shape well. All in all I'm a big fan of these and would happily buy them again even for double the price!

Needed a replacementt turn signal assembly to work with 6v dc (Honda trail ct110) after making a bracket off the tag plate holder and swapping out the 12v bulbs to the 6v bulbs , These don't catch on trail objects like the OE did. Don't look too bad, and function as they should.

The housings are made well. The terminals were reversed in one the sockets which made the running light brighter than the turn signal. The bulbs are poor quality. One burned out in the first ten minutes and there is very little difference in filament brightness for running lights versus turn signal. They look good I would recommend buying them along with replacement bulbs at the same time.

Work as they should and nice looking. Wire could be a little bigger gauge but they work

Fit and finish is great, very solid. I should have payed attention to the wiring as i needed 3 wires for the running lights for the front of my bike! That was my fault. But the rear lights work like a charm. I wont be returning the other 2 lights, i can use them for something else. Its a great price they still run good. but the small bulb size does effect the brightness of it. its very dim. hard to see. at night its ok. I should have gone with the stock lights but they are $75 each at the dealership. these got to go if I want to pass for inspection.

*UPDATE-* they actually worked but a club was not Legit. 12v10amp bulbs are like your license plate lightbulb, every Autozone in earth and even gas stations will have them. Not a terrible product. IF you’re ok with tools, take them apart and solder the ground to the spring.. I’m slow so I did that before I swapped bulbs and figured out the Real Problem which is about $1.99.. they’re stylish and get me like 30 MILFS a day asking for my digits One didn’t work.. took the lens off, bulb looked ok.. took out the inner housing and inspected wires.. put it back and pressed the bulb in a few times, worked, stopped working, now works again… 😑 I’ll never be able to trust these and will get new ones from somewhere else. Keep shopping around!!!

Solid metal turn signal. Lens is amber with rubber gasket to keep moisture out. As another reviewer noted, my signals have amber lenses as well as amber bulbs. I felt this made them not bright enough for proper daytime use. I simply swapped out the bulbs with the OEM bulbs from the original signals. The only thing missing was some kind of connector, like a bullet connector plug for each wire. I purchased them cheaply elsewhere and once applied, installation was simple. Would buy again without hesitation.

I bought these for my 82 Honda V45 Magna to replace the cheap plastic turn signals that were installed when I bought it. They look awesome, made of metal, and seem to be high quality. My only complaint is that they made my blinkers hyperflash, twice as fast as normal. The old ones were incandescent, just like these are, but the resistance must be lower causing it to blink fast.

Don't bother, buy better quality signals

Installed the lights and took the bike out for the first ride, when I got back, 1 of the amber lenses had melted a hole through it, and as some previews reviews, these lights are dim, didn’t bother me fir brightness since I have an integrated taillight, but for those whom would rely on these for signals ,they would be SOL. Do not recommend. I decided to look further into this matter, since I have bought them already, upon opening the light unit, I believe one of the reasons the light may be drastically dim is that the reflector inside the light is dull and mat, if it were polished or chrome, it would certainly be some what brighter. I will replace the bulbs with a 1157 LED version and see if I can salvage the purchase.

Bonjour je doit avouer que je suis très satisfait !!! Tres belle qualité , belle finition , la peinture est impeccable, très bien construit ! Ampoule 12v 10w 10r j’acheterait a nouveau sans hésiter

Worked great as a turn signal on a 1938 chevy

I like the quality of this product