All Sizes & Colors 5-100 FT Polyolefin 2:1 Heat Shrink Tubing LOT

This is exactly what I needed. Having to go through and re-identify the white wire of about 150 twisted shielded pair cables so they meet a black and red color code I started looking for red shrink tubing. My options seemed really limited since either I couldn’t find it small enough to shrink down on an 18AWG wire, or it had the adhesive inside and the thickness would have made it too large for the labels that were going to be placed on the wire. I thought I’d try this since the price was really reasonable and with the 100’ roll I could cut off the various lengths I needed without having to waste a lot like I would have with the other products I’d seen available only in 3’ and 6’ lengths. This stuff shrinks down and holds onto the wire just fine. It also doesn’t add a lot of girth so I’m able to reuse the wire tags which is going to save me a LOT of time.

I wanted a way to add protection and gription to my drum mallets. This product worked very well and I like the sheen of the clear covering. I used the 3/4 inch tubing on both 1/2" mallets (with rubber tips) and also the thicker yarn tipped mallets. On some of those, the diameter of the stick was smaller than 1/2" and the tubing shrunk down nicely as well. I used a heat gun and it took about a minute to shrink the tubing on the mallets.

Have a couple Motorola EP 450 radios.Antenna's rubber-like material cracks over time, becoming useless.With this material, saved several $ in new antennas. Old ones will give extra years of performance.

Works well for automotive wiring repair. I had a squrrel nest in one of my cars and ate 9 wires. I have been soldering and heat shrink tubing for years and this stuff worked great! Happy I ordered 200feet of it!

Fast shipping, good product, exactly what I needed, excellent price.I build a lot of custom cables and use heat shrink tubing for color coding them. This size is perfect for smaller install cables.I'll be back for more.

I used 1/2" clear tubing to wrap ID tags around electrical cables (14/3 SJOOW size). The heat shrink tubing worked as expected and shrank down very clear and smooth. The tubing also remains quite flexible once at its final size.

This shrinks very quickly and uniformly with my Wagner Heat Gun. The stated shrink ratio of 2:1 is about right. Good stuff.

Have been using polyolefin heat shrink for many years and this is no different. The pricing is very reasonable and much less than buying at the local electronic supply store in 4 ft. lengths.