Loc-Line 40413 Coolant Hose Assembly Kit, Acetal Copolymer, 7 Piece, 1/4" Coolant Hose ID

Used in combination with a wye attachment and some 1/4" clear tubing and inline GFCI to deliver stream of water to a DIY masonry saw setup. Worked like a charm cutting 20 linear feet in basement slab - zero dust! Saved myself $300 over buying a ready-made masonry saw. Now I can disassemble and repurpose into something else. Modular Loc-Line elements fit together nice and solid and retain their shape, while being easily manipulated into desired custom shapes. Zero leaks. I was able to make do without the dedicated tool for separating / attaching the "links" between modular loc-line elements but if you're going to have to work with this stuff a lot I'd highly recommend spending the $12 on the tool - these attachments are tight!

Great quality! Perfect for my little project.

Works great! I wanted to cut aluminum on my CNC and needed a consistent way to apply water coolant. The nozzle is of a good (small) diameter, which means it can shoot a good amount of pressure in a directed stream, thereby clearing chips and providing sufficient cooling. I also purchased this mist/spray mount, but since I prefer an actual stream of liquid rather than a mist/spray, I am going to use the enclosure/box from this item: https://www.amazon.com/gp/product/B071DXGGP4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 And I have removed the hose that it came with, and instead put this product (Loc-Line 40413 Coolant Hose Assembly Kit) in its place. (that's what you see in the video). This way, I will be able to use the housing to mount it on my CNC's Z axis, while having the jet stream that I like rather than the mist spray. I'm using a simple aquarium pump ($10, up to 80 gallons per hour of flow) to make this work. Highly recommend!

No leaks at any joint like the reviews say of the cheap copies. I'm using mine for water at a low to medium pressure. You do not need the pliers. They snap together without too much trouble. You can run the female side of the joint under hot water if necessary to make it slightly easier to snap together. I like that it came with 3 different nozzle sizes and also 2 sizes of the threaded end to connect to adapters for water/coolant source. I bought the extension kit 41401 because I thought this might be too short but I did not need it for my purpose. See pic for length, the brass adapters do not come with it.

had no problem popping together with my hands though it did give me a bit of fuss. twist and power down no other trick to it. if you are going to need to make different links and move it all the time don't bother with their wrench just buy another kit they're like the same price. i can't attest to air tightness or the plastic hose fitting - but wouldn't bet on it. i feed a 1/4" pneumatic hose through all the way to the end. i think it'd be nice if one of the bases weren't round so you could zip tie it to something but i'm going to make a mount anyways. works fine, prob will paint it black as quite the ugly/cheap looking color imo

I only use this for air on the scroll saw. Easy to adjust. Some reviewers had a problem assembling the parts. Here is how I did it. I stood the coolant hose on the bench, held the fitting on the end and taped it with a plastic hammer. I then rotated the hose end for end and taped the nozzle in place. No problem.

Hight quality product way better than the off brand junk

BUY THIS AND NOT THE CHEAP KNOCKOFFS.

Excelente kit para poder USAR con liquidos

Tun was sie sollen finde nur das Preis Leistungsverhältnis ist zu teuer

Works as expected. Sections fit together tightly. The assembly pliers is a wise addition to your purchase. However. It is possible to snap the parts together with a bit of brute force.

good

Bra passform och tät