Mounting Dream Soundbar Mount Sound Bar TV Bracket Holds up to 20 Lbs

Very happy with soundbar- Easy enough to install. clear instructions, stable, good quality and like that you can move the soundbar bracket for different positions. I had previously got 2 other soundbar mounts and was not happy as one was not good quality and the other did not fit my tv- even though its only 65in. This one worked perfect for me. I originally wanted one that i did not have to remove the tv but at the end of the day its easy enough with a helper and tvs are pretty light nowdays. In addition screwing it into both holes on tv makes it more secure.

Bought this to mount my soundbar. Install was easy, compatible with the tv mount of the same brand. Mount is designed to move with the tv, which is what I required. All installation hardware was included along with a few "extras".

First, I purchased the Mounting Dream TV Wall Mount for 32-65 Inch Television,Mount with Swivel and Tilt, Full Motion Bracket with Articulating Dual Arms, Fits 16inch Studs, Max VESA 400X400 mm, 99lbs, MD2380. Over the years, I have purchased 4 Wall Mounts from different companies. This is the BEST. Second, I needed a shelf for the ROKU Sound Bar. Mounting Dream has three different mounts for Sound Bars. Since my TV wasn't that large, the first Sound Bar Mount that I ordered was TOO BIG so I returned it without any problem. The second mount works great. It securely attaches to the TV Mount and securely holds the Sound Bar in place. Quality design.

I bought two different sound bar mounts, and this one worked the best, overall, if I was in the market for another one, I would buy it again. It has very clear instructions, and it has a large and organized assortment of mounting hardware which really helps with finding the right size for your particular TV. This mount has a great feature, which is that it uses two screws on each of the vertical arms to attach to the horizontal arm, meaning that the mount won’t collapse or rotate sideways. The other brand that I bought only used one screw in each of these positions, and even with significant tightening, would still move from side to side. My primary concern with this mount is that the brackets which hold the actual sound bar droop slightly from a 90° angle. In my application That’s actually a positive attribute but I think in many cases that would be a bad thing. My other slight concern, but probably in the area of a feature request is for the vertical bars to be longer so that I could screw into all four of the vesa mount holes on the back of my TV instead of just two. Vertical bar length seems to be fairly common however, as it was similar with the other kit that I bought as well. Just a recommendation I used about 6 long twist ties to attach the back of my sound bar to the mounting bracket itself for peace of mind that the bar wasn’t going to slide off if bumped.

5-star product and brand, but I had to buy extension brackets from the manufacturer website because my Samsung 49 inch Q6F series TV (TV model QN49Q6FNAF) has VESA mounting holes that sit near the top of the TV, not at the center or bottom. I still wanted to mount the soundbar on the bottom of my TV. Thankfully another customer mentioned this issue in their review, making a remark that Mounting Dream sells longer vertical mounting brackets on their website. This promoted me to research and buy the longer brackets. You cannot find these longer brackets on Amazon. The product name is “MD5425 700mm Vertical Bracket”. They cost an extra $25 (as of 2025). But otherwise that combined with this product on Amazon is what I needed and it worked perfectly. Again, you may only need these if you have a TV where the VESA mounting holes are at the top of your TV. See photos from back of my TV for reference. Overall product is solid, looks pro, and I love it.

I really didn't want to go through getting someone to help me lift the heavy 75" TV off the wall mount to do this. I measured things before ordering this product and it worked as hoped. Instead of using the VESA mounts I used the screws that would otherwise mount the TV to the stand that comes with it. The screw holes in this case measured 50 cm apart horizontally, 6 cm apart vertically and the lower screws were 5 cm from the bottom edge of the TV. The extra length of the bars from the the Soundbar Mount went under the TV mount without interference so I did not have to cut or modify anything. It was a one-person job done carefully in a less than a half hour. Assembly of the mount itself was done earlier to size things up and took maybe 15 minutes. I'm no professional and over 65 but consider myself fairly handy. I used the screws that came with the TV and found four washers to make them comfortably hold the soundbar mount to the TV. With my installation the back edge of the Sonos Beam is just barely behind the edge of the TV with most of the speaker forward of the TV. It looks good to me and seems ideal from an audio perspective. The Beam is about one inch below the TV but that is easily adjustable. (I actually tried a couple different positions before settling on this one.) This was quick and easy for one person and the result feels very solid. About the only thing I would add to the Mounting Dream Soundbar Mount would be a cosmetic panel to hide the wiring (HDMI, power cord and, optional but in use here, Ethernet).

Worked perfectly as advertised, decided to mount the sound bar on the top with that option and it worked out perfect and sounds much better!

I see many negative reviewers didn't bother reading because it flat out says that if you have a shorter soundbar that you only use ONE of the lower bars and SKIP joining the two halves into one long one. Yall joined the two halves into one long one and now are leaving bad reviews about it being TOO LONG when its only too long because of your own doing. Not the companies fault. That said, I must have gotten something different than the reviewers who call this sturdy. My Atmos bar has upfiring drivers that are precisely angled and this kills that because it's so flimsy that my 19 lb sounbar bends it down enough that the front faces about 15 degrees downward instead of laying flat and allowing the drivers to ptoject at their intended angles. Because of the bending of this flimsy mount the front and side drivers fire downwards and my up firing drivers are aimed down enough that it's aiming sound over my head towards the back wall instead of at the ceiling midway through the room. It will do for now but if you have a bar that's closer to 20lbs I'd recommend looking elsewhere. After I find a suitable replacement this is going in the garbage ASAP. If you have a significantly lighter bar, id say around 13 lbs or less, this would probably be great, but no way should they be claiming this is designed for Atmos/upfiring 20 lb bars when it bends to such an extreme that it destroys Atmos functionality, under less weight than that. And beyond that I really don't trust this "Gumby mount" not to bend more and more over time until it dumps my bar on the floor or fails in some other way and I'm out 1300 dollars... Edited to add photo Edit 2: to make things right, the seller reached out to me to offer to ship out one of their other models that is much sturdier (MD5428), as well as a longer bar to go with it to accommodate my soundbar, free of charge. They shipped quickly and setup was as easy as the other model. The replacement upgrade they sent is much more heavy duty and I have no complaints!

Muy fácil de instalar. Trae todo lo necesario para armarla y sobran tornillos. Lo único que necesité fue un desarmador Philips. La coloqué en el mismo brazo que sostiene la pantalla, con los mismos tornillos que ya tenía la placa. Es muy resistente, sólida, bien hecha. Se ve que durará muchos años.

Atende a necessidade

I'm very pleased with this mount. I can say it definitely works with the Amazon Fire TV Soundbar Plus. I have mounted the bar under my LG 75 inch TV and it is very solid and sturdy. I was able to install it while the TV was on the wall. Would definitely recommend.

Esta muy bueno , el único pero que le pongo, es quelas bocinas quedan instaladas del paño de la tv hacia afuera , a mi por estética me hubiese gustado que las bocinas quedarán del paño de la TV hacia adentro, para que de frente no se viera la bocina sobresalir, pero es un gusto muy personal y entiendo que pudieran perder sonido al quedar atrapado estando en el interior

The screws to bolt the Sonus Beam to the bracket is also provided! Clear instructions, easy to set up.