Dremel 120V Engraver Rotary Tool with Stencils (290-02) | Engraving Tool for use on multiple materials, 5-Speed Settings, Soft Grip and Lightweight Design

Works as intended, I use it for engraving hand tools. I purchased separately the diamond point dremel engraving bit. Cuts better than the one included with this engraver (see my review). Lighter than dremel rotary tools, and smaller, though the plastic seems to be of the same or similar quality. Stroke per minute dial works as described, engraving depth can also be adjusted by the pressure you apply with the tool, the bit (like the diamond bit), and how many passes you do. Engraving small initials is easy, making decorative glass would be more challenging and would require more skill, but this is not what I use it for. After a few tests on some scrap to get the feel of it, I was ready to go. I was pleased with the results from the tool, but my handwriting, not so much. Tool worked well. Included stencil works if the tool is help perfectly vertical to the engraving surface. Though the way the letters are stenciled, there are large gaps due to the thickness and design of the stencil. For example a letter B looks more like 13. Sometimes I used the stencil and then filled in the gaps by hand. It's very similar to writing with a large, vibrating, noisy pencil. If you have a steady hand you could easily write someone a letter on a piece of sheet metal. It is rather noisy, especially on the higher settings, lots of buzzing and rattling but doesn't retract from the functionality. This isn't the sort of thing that requires stealth anyway. I had no problems with the set screw when changing bits. I was prepared with a small flat bladed pocket type screwdriver and know how not to strip a screw. Snug it up and you're done. If the bit comes loose (which mine hasn't) snug it down a little more. If you start perspiring, grunting, or shaking violently while tightening it down, ease up. It's a set screw, not the lug nuts on your spare tire. Good price, Dremel is a name brand, and bits can be purchased at most hardware stores. I was unable to find the diamond bits at my local hardware stores so I just orded it with the engraver from Amazon. Good tool

This takes a bit of getting used to when using and suggest anyone start with some junk pieces of metal and glass. But once you get the hang of it this works great. This is an update of my previous review. I have recently started using this tool to do engraving on glass. If you consider doing this I recommend two things. One is a dust mask, preferably one where you can pinch the nose to make it fit well. You do not want to be inhaling glass debris! These are inexpensive at any pharmacy or hardware store. And you will want to use work area where you can use a paper towel to clean up the small bits of glass that come off the glass you are working on. Glasses or goggles are advisable as well. I started doing work on small vases and am now using old wine bottles putting scenes from Italy and France on them and using these as gifts for people to use for olive oil or oil and vinegar or other similar uses. I do my work freehand and while it is tricky engraving on a slick surface after getting used to it I have found it works beautifully. I have set of diamond tips but find that the tool that came with the Dremel works great and I seldom use any other bit. I use lowest setting for speed since at higher speed I did crack one vase while engraving. Was able to save it, as it was minor crack, but since then I have done probably 25 vases and bottles and no cracks. Using old bottles is great way to gain experience with the tool and find how you have to hold it to get the right cut but once you do if you have any artistic skills (mine are probably average) you should find you can produce good work that make great and inexpensive gifts. I wait for Bed, Bath and Beyond to send me $5 off on $15 coupons and use those to buy pourers for olive oil, etc. to add to the bottle when using for myself or for gifts. These pourers do not come with dust/bug caps which you need. Solution I found was to go to Home Depot and buy a pack of 96 small end caps for shelving units. Works perfectly as a cap for pourers. At $6 with tax for 96 this is very economical.

Works as it should but heavy and loud. Might be easier for someone with better hand strength

Works great!!

Great for puttin numbers on things after you wait months for a form 1 to clear.

Este producto lo recomiendo 1000 veves está increíble trabaja muy bien más de lo que esperaba...no me arrepiento

Great to engrave on steel, leather or wood.

You're going to want to buy this because it's 1) 25 or so dollars and 2) it's a Dremel. Please reconsider. This is just a bad product. Here are some reasons: 1) This is NOT a rotary tool. The engraving bit does NOT spin. It vibrates. The vibrating element is housed in the rear of the unit. If you've ever pulled a heavy trailer with a small truck, then you know that it's a bad idea to have something heavy, swinging back and forth at the opposite end of the thing you're trying to control. The point? Good luck drawing/cutting a straight line with this thing. Curves are a fantasy. It's hard as hell to hold, all the weight is in the back of the unit and it is constantly shaking. Whoever designed this does not actually engrave things. 2) This is the LOUDEST, smallest tool I (unfortunately) own. Imagine a dentist's drill, drilling into sheet-metal, inside an echo chamber and you're halfway there. I am not sure why the Dremel company thought that this product was ready to go without a surgeon general's warning about the threat to human hearing. Please do not use this without serious ear protection. 3) No power. For as loud as this thing is. It sure isn't powerful. Press it as much as you want. Nothing will be engraved, but you will lose feeling in your hand from the vibration. 4) It feels cheep. It is cheap and it feels cheap. This feels like the first version of a college engineering students freshman build project. Or something a friend fabricated with a 3D printer and off the shelf parts. I've seen prison tattoo guns that look more sophisticated than this piece of junk. Really disappointed in Dremel. 5) This is not a quality product. This is a cash grab. This is Dremel doing some fast market research and realizing that it could invest $15 into an terrible engraver and see a $10 profit on the sale of each unit. I really like Dremel. I used to own one of their rotary machines until it crapped out after about 10 years. The difference is...I paid good money for that one. I relied on the Dremel name and got burned. This is a piece of junk. Save your $25.

Good but extra marking pin the box

I love this product for it's reliabilty and easy to use design. I use it mostly as a labeler and its so handy, plug it in and use! I also love the slim design as it alows you to get a more pen like grip whereas my bigger dremel i had to set up a flex schaft... And till i was ready to label i was frusterated. So if your looking for something that you can grab and use quickly to label this is a must have. But if your looking for something to do lots of engraving with for long periods of time id probably go for the bigger roatary tool as this one is a bit loud!

وصل المنتج مفتوحا وهذا شيء غير جيد على العموم أنا راضٍ عن المنتج

Excelente producto

Easy to use, quick to learn. I've only used it on glass and stainless steel so far, but it's performing beyond expectations. Very satisfied, would definitely recommend.